LC - MPO Multi Fiber Push On APC≥60 Return Loss ISO9001
Certification
MPO/Multi-fiber Push On
♦ Introduction
1. Low insertion loss,high return loss .
2. Low Insertion Loss & PDL
3. Excellent mechanical endurance .
4. 100% NEW raw material and well quality control ensure the best
life time .
5. Connector Options: FC/SC/LC/ST/MU/E2000/MT-RJ/MPO/MTP
6. The fiber optical patch cord can be customized according to
customers'specific .
7. Feature Connector with Ceramic Ferrules
- Space-saving 12 fibers in a single connector
- High density connections between network equipment in
telecommunication rooms
- Easy installation and removal with push-pull latching
- Compact design for high fiber-count applications with space
limitations
-. With 12-fiber and 24-fiber MPO/MTP connector standard
- Available in OS1/2, OM2, OM3 and OM4
- Available in FC,LC, SC, ST, MU, and MTP/MPO
- Interface polished type has PC, UPC and APC
- Available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers
-100% factory tested
- Discrete connectors are heat-cured and use ceramic ferrules and
sleeves
- Fan-out fibers from MPO/MTP connectors into individual simplex or
duplex
- Customized for length, staggering, connector type, breakout type,
fiber count, and labeling fiber
♦ Polarity
Type A - Straight (key-up to key-down): Straight-through polarity
is typically for connecting patch panels. They are wired in a
mirrored configuration, going from Pin 1 on one connector end to
Pin 1 on the opposite end, etc.
Type B - Rollover (key-up to key-up): Rollover polarity is used
primarily for connecting to switches and transceivers in 40Gb
applications. In a 12-strand rollover polarity, the cable is wired
from Pin 1 on one connector end to Pin 12 on the opposite end. Then
2 to 11, and so forth.
Type C - Flipped: Pair-Flipped polarity is the most commonly used
polarity type for this cable, and typically used in
cassette-to-cassette applications. Pin 1 on one end goes to Pin 2
on the opposite end, and 2 to 1, 3 to 4, 4 to 3, and so on. This is
the default polarity option, but you can select your desired
polarity from our drop-down menu above.
♦ Specification
| Parameter | Unit | Value |
| Connector | / | MTP/MPO | FC ST … SC LC |
| Ferrule | / | APC | UPC | PC | UPC | APC(Step) | APC(Conical) |
| Fiber Type | / | SM | MM | SM | MM | SM | MM | SM | MM | SM | MM |
| Insertion Loss | dB | <0.7 | <0.5 | <0.25 | <0.20 | <0.25 | <0.20 | <0.30 | / | <0.30 | / |
| Repeatability | Time | >500 | >1000 |
| Interchangeability | dB | / | <0.10 |
| Return Loss | dB | >36 | >20 | >45 | >36 | >50 | >36 | >60 | / | >60 | / |
♦Packing
Plastic bag & Carton
