Fully Automatic Single Twist Machine / Security Wire Bunching
Machine
Single Twist Machine Merits:
1. Security protection: If the door contact is not in place, lift
contact is not in place, internal and external wire broken error
display in the touch screen on the automatic alarm or can not start
to work
2. Change the lay length: easy to operate, just change the leading
wheel according to the lay length sheet
3. Pressing device: equipped with two pressing devices to ensure
the roundness of the conductor after twisting, to protect the
product characteristics of thin-walled insulation line, effectively
reduce the wear and tear of insulating materials.
4. Meter counting way: the latest domestic design, with spindle
meters; the same machine twisted with a conductor specifications,
meter error in one ten thousandth
Single Twist Machine Mechanical Performance
1. Spindle:
1) Material: 40Cr steel forging after quenching and tempering
treatment.
2) Accuracy: The shaft core outer face diameter and the bearing end
face are ground to ensure concentricity and verticality with the
axis.
3) Dynamic balance: Standard of G2.5 (0.03 grams of weight
difference)
2. Aluminum plate:
1) Material: ZL104
2) Accuracy: All end faces are positioned relative to the locating
holes(less than 0.03 grams)
3) Dynamic balance: Accuracy of G2.5 (0.03 grams of weight
difference)
3. Spindle housing:
1) Material: ductile iron QT42-10.
2) Processing: CNC machine tooling
3) Accuracy: one processing hole end molding, to ensure
concentricity.
4. Spindle bearing lubrication system:
1) Lubrication method: butter lubrication
2) Butter Model: LGMT2
3) Sealing method: mechanical oil retaining ring, keep the machine
clean inside
5.Take up:Tensile tension control: through the magnetic clutch
control thread tension, by the PLC program controller automatically
adjust the tension, keep tension constant
6. Cable laying:Special two-way cable laying device, φ15mm light
rod bearing type,lay length and distance can be accurately adjusted
