hot dipped galvanized Press Locked Steel Grating for platforms
Product description
Press-locked grating is also called pressure locked grating or press-locked steel bar
grating. Basically, the press-locked grating have the same load
capacity with the welded steel bar grating. The difference between
press-locked grating and welded steel bar grating are joint
connection technology and cross bars.
Cross bars of welded steel bar grating are twisted square rods and
the bearing bars are rectangular bars or I type bars. Both the
bearing bars and cross bars of press-locked grating are rectangular
bars.
Compared to welded steel bar grating, which is produced through
resistance-welding process, the press-locked grating is constructed
with the two close-tolerance slotted bars bonded together by
tremendous hydraulic pressure. This production can let press-locked
grating be a permanent locking.
Press-locked grating and swage-locked grating has excellent lateral
stiffness, which can be used in some special applications. And the
serrated surface is available for press-locked grating.
Specification:
- Materials: low carbon steel and stainless steel.
Surface treatment: galvanized, painted or powder coated.
Surface type: smooth surface and serrated surface
Serrated surface type:
PR/S1: Trapezoidal teeth on the bearing bar.
PR/S2: Trapezoidal tooth both on the bearing bar and cross bar with
the highest non-slip performance. In this three types. it is most
popular.
PR/S3: The non-slip tooth is applied to the connect components. It
has the lowest non-slip performance.
Bearing bars and cross bars are notched and have same height. | 
Bearing bars are higher than the cross bars,bearing bars are
notched. |
Bearing bars are higher than the cross | 
Notch on the bearing bars are at a angle of 30° or 45° |
High strength and high bearing capacity:
- Non-slip, anti-corrosion, not easy to deform.
High safety performance.
Do not accumulate rain, snow and dust.
Simple and beautiful appearance.
Easy to install and remove to extend the lifespan.
Applications of serrated welded steel grating - Serrated welded steel grating is widely used as platforms, stair
treads, walkaways and floors in industrial, civil and commercial
buildings.
Grating Standardizations:
| Countries | National Standards for Grating | Materials | Galvanizing Standards |
| China | YB/T 4001.1-2007 | GB 700-88 | GB/T13912-2002 |
| America | ANSI/NAAMM(MBG531-00) | ASTM(A36) | ASTM(A123) |
| Britain | BS4592-1995 | BS4360(43A ) | BS729 |
| Australia | AS1657-1992 | AS3679 | AS1650 |
| No | Item | Description |
| 1 | Bearing bar | 25x3,25x4,30x3,30x4,30x5,32x5,40x5,50x5,.....75x10mm |
| 2 | Bear bar pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 34.3, 35, 40,41,60mm.
US standard: 1"x3/16", 1 1/4"x3/16", 1 1/2"x3/16", 1"x 1/4", 1
1/4"x 1/4", 1 1/2"x 1/4" etc. |
| 3 | Cross bar pitch | 38,50,76,100,101.6mm |
| 4 | Material | Q235,A36,SS304 |
| 5 | Surface treatment | Black, hot dipped galvanising, paint |
| 6 | Standard | China: YB/T 4001.1-2007 |
| USA: ANSI/NAAMM(MBG531-88) |
| UK: BS4592-1987 |
| Australia: AS1657-1985 |
Feature:
Appearance: simple lines. Silver exterior, modern trends.
Best drainage: leakage area of 83.3%, more than double the cast
iron.
Hot-dip galvanizing: rust-proof and strong, maintenance and
replacement.
Security design: box with hinged lid and connection, security,
safe, easy to open.
Saving investment: large span. When overloaded, the lowest ratio of
iron and saves replacement costs stolen, then crushed.
High strength: strength and toughness is much higher than cast
iron, can be used for terminals, airports and other large span and
heavy load environment.
Specifications and more: meet different environment and loading
requirement. Span, the desired size and shape.
Press Locked Steel Grating -STG0001
Serrated welded steel grating -STG0002
Serrated welded steel grating -STG0003
Welded Steel Bar Grating-STG0004
steel grating
steel grating
