Voltage and current 38V 6A charging of adjustable lift and
depressurization module
Technical indicators:
1. Adopt advanced microprocessor to adjust output voltage and
current accurately.
2, it can be boosted and depressurization.
3, full digital display, convenient and easy to use;
4. It has constant pressure and constant current state.
5. The 4 bit high brightness digital tube can display the
parameters of output voltage, current, power and capacity in real
time.
6. Automatic / manual switching of display voltage, current, power,
capacity and other parameters.
7, with output OUT, constant voltage CV, constant current CC
indicator, you can view the working status in real time.
8, it can be automatically output after setting up power.
9. One key can save the current set voltage and current value
10, with memory preservation function, can store 10 sets of
parameters, and can be stored and transferred freely.
11, the maximum input current of the boost mode is 8A, so if the
output voltage is higher than the input, the output current may not
be able to reach 6A at this time. The specific calculation is shown
in the following example.
Example: the maximum input current of the module is 8A, and the
input power is 192W when the input voltage is 24V.
Output power = input power * conversion efficiency =192W*0.85=163W.
If the output voltage is 38V, the output current can reach about
4.289A and is continuously adjustable under the maximum input
current limit.
| properties of module | Non-isolated BUCK |
| Input Voltage | 10V-40V |
| Output Voltage | 0-38V |
| Output Current | 0-6A |
| workpiece ratio | 92% |
| Power Consumption | -40℃～+85℃(industrial-grade) |
