NO
| Machine name
| QTY | Remarks
|
| 1 | Hydraulic mill roll stand
| 5 | Full hydraulic control, hydraulic station Taiwan brand,Cog-type top
paper chuck and three point brake, RE Italian brand. |
| 2 | Hydraulic paper rail | 10 | 1 set of hydraulic driven track and trolley (track length is 10
meters according to site requirements), including raw paper
centering device |
3 | Single facer | 2
| Single facer (SF280S/320S/360S or HF series),
corrugatedroller￠(280,320,360,380,408)mm,corrugated roller is made
of 48CrMo high-quality alloy steel, upper and lower corrugated
roller seat is designed separately from the whole machine, which
can be lifted and replaced as a whole.Frequency conversion motor,
electrically adjust the width of glue coating, pneumatic operation
of upper glue roll back and reset, sizing mechanism can be removed
horizontally for easy maintenance.No paste fork negative pressure
centrifugal suction, the main bearing NSK products.Adjust glue
amount automatically according to speed change, touch screen
display glue coating gap.Frequency converter for Taiwan delta
products.Gear box for grinding teeth.delivery valve for inverted
bucket type, Shanghai brand.Stainless steel glue groove. Automatic
circulation glue supply, pneumatic diaphragm pump gluing. |
| 5 | Double layer bridge | 1 | Double layer bridge, Paper holding department 2 sets, independent
transmission, frequency conversion motor. Automatic adjustment
according to the speed of single machine to keep synchronization.3
escalators. |
| 6 | Pre-heater(inner paper)
| 2 | Preheating cylinder ￠600mm,900mm,1000mm,1100mm diameter, electric
adjusting preheating area, a safety shield electric synchronous
rotation |
| 7 | Pre-conditioner(corrugated paper)
| 2 | Preheating cylinder ￠600mm,900mm,1000mm,1100mm diameter, electric
adjusting preheating area, a safety shield electric rotation. |
| 8 | Triplex pre-heater | 1 | "L", preheating cylinder diameter ￠600mm,900mm,1000mm,1100mm, with
the rotation speed motor drive and paper. |
| 9 | Duplex gluing machine | 1 | Roller type, pneumatic control for lifting.318mm rubber roller with
a digital display of rubber quantity. Automatic glue adjustment
according to speed. Stainless steel rubber tank. Electrically
adjust the gap between the press rollers. The main bearing USES the
Japanese NSK brand. |
| 10 | Double facer | 1 | 600*18 pieces of automatic deviation correction up and down one set
of pneumatic tightening. Press plate 15 group |
| 11 | Conveyor | 1 | Made in China |
| 12 | Main drive | 1 | Independent reducer, drive roller rubber plate imported from
Germany |
| 13 | Electrical system | 1 | Schneider, zhengtai brand, Taiwan delta inverter, including control
cabinet to the main electric wire |
| 14 | Steam system | 1 | The TLV trap |
| 15 | Splicer machine | 5 | 200m/min |
| 16 | Production management system | 1 | |
| 17 | Bridge tension correction | 1 | Mechanical automatic control system guangdong |
