led pcb smt machine
In the smt production line, the most important machine is pick and
place machine which is the most high technology and most expensive.
So how to choose the right pick and place machine? There are some
points:
Is it suitable for your products?
This is the base point for choose, many placement machines usually
only produce two or three products.But for our HT-E8S, it can
produce more than ten products, such as the led tube,bulb, flexible
strip, street lamp, panel light, down-light, lens, power driver,
electric board,household appliance, etc.
Why it can suitable for so many products? Cause, the max component
size is 17mm, the min size is 0402.
Besides, for our machine the max pcb size is 1200*300mm,the min
size is 100*100mm, the thickness is 0.5-5 mm.
And Printed circuit boards are not general end products, and the
definition of the name is slightly confusing. For example, the
motherboard for personal computers is called the motherboard, and
cannot be directly called the circuit board. Although there is a
circuit board in the motherboard, it is not The same, so the
assessment of the industry when the two are related can not be said
the same. For example, because the integrated circuit parts are
mounted on the circuit board, the news media called him an IC
board, but in essence he is not equivalent to a printed circuit
board. We usually say that the printed circuit board refers to the
bare board - that is, the board without the upper components.
Is it reach the capacity of your plan ?
HT-E8D is dual system, dual module multifunctional mounter. To
produce two different products at same time.It is total 16 heads,
the mounting speed is reach 40000 chip per hour.
Is there an after-sales guarantee?
Our company attaches great importance to the construction of the
service field and is committed to providing customers with a
complete set of service systems. We have a dedicated after-sales
service department with three offices in Shenzhen, Zhongshan, and
Hangzhou, and two offices in India, in Delhi and Mumbai. Currently,
ETS is actively establishing offices in other countries to better
Serve customers around the world faster and faster.
We will provide free on-site installation and training for our
customers, provide a standard warranty, and replace any parts
during the warranty period. In addition, we also visit customers
regularly, provide the latest technical support, and so on.
Attention:
For better use of the machine, you need to check the part name
process weekly. Note that the nozzle clamp checks the buffering
action. If the action is not smooth, apply a thin layer of
lubricant. If the jig is loose, tighten. Move the lens to clean
dust and residue from the lens. The X-axis screw checks the lead
screw for debris or residue and cleans it if necessary. The X-axis
guides check the grease for hardening and residue adhesion. The
Y-axis screw checks the lead screw for debris or residue and cleans
it if necessary. The Y-axis guide checks the grease for hardening
and residue adhesion. W-axis screw Check the lead screw for debris
or residue and clean if necessary Air interface Check the Y-ring
and O-ring for aging and replace if necessary.
Contact us:
If you are interested, please contact us!
Add:44th.Building,5th.Cuigang Industrial Area, Fuyong, Baoan
District, Shenzhen,China
Wechat/Whatsup/tel:+86-13590151025
Fax:0755-29502066
Http:www.smtmountingmachine.com
