Guihe Fuel Tank Management System SYW-E Double Wall Tank Leak
Detector for Petrol Sation
Product Introduction
In order to detect leaks as soon as possible and to prevent
contamination, the use of double-walled tanks and piping has been
made mandatory in most countries. GuiheTank Leakage Detecting
Instrument consist of GH-SLI Console and SYW-E Sensor. It can make
a distinction between water and oil, enjoys real - time monitoring
function. This system designed for detecting water and oil between
the two layers of double-deck tank. When there are lakegae between
the two layer of tank, the SYW-E Sensor will detetect it and give
singal to GH-SLI Console, the console will giving an audible and
visual alarm through software calculation. Users can take measures
to deal with the leakage according the alarm, to avoid the safety
hidden trouble and environmental pollution.
For monitoring tanks
For tanks at petrol stations, leak detectors offer the optimum
benefit-cost ratio. Several tanks with a leak detector can be
monitored safely and cost-efficiently using the GH-SLI range of
leak detector systems.
Technical Parameters
◆ Power Supply: 220VAC
◆ Explosion-proof grade: ExiaIIBT4
◆ Alarm method: audible and visual alarm
◆ Sensor size: according to the length of the tank
◆ Temperature: -40℃～+70℃
◆ Environment humidity: ＜85%
◆ Accuracy: ＜3mm
◆ Response time: ＜2s
◆ Pressure range: 80Kpa～110Kpa
◆ Output mode: switch output
◆ GH-SLI Console size: 300*180*113mm
◆ Blind size: DN50/80/100
Product Features
Safety is the number 1 concern of most companies involved in the
handling of petroleum fuels, and protecting the environment is a
close second. The regulatory framework in both areas is getting
progressively tighter, so if your business involves the production,
transportation, storage, refining or consumption of fuels, you need
to consider the possibility of a leak.
In some situations the potential source of a leak can be
anticipated. A valve pit, an overfill containment or a low point
sump is an ideal location for a fast acting fuel probe. Quickly
knowing that fuel is accumulating in an unexpected area can be the
key to avoiding a catastrophic accident or expensive clean-up.
Don’t make the mistake of thinking that a “slow” leak is a “small”
leak. A slow leak results in a large spill if the detection system
is too insensitive to detect leaks below a given threshold or below
a certain percentage of flow. Far too many leaks are discovered
when someone notices the smell of fuel, or after surface/below
ground water has become contaminated.
Using picture
● Normal state: power lamp flash, alarm lamp not light, buzzer not ring
● Alarm state: power lamp not light, alarm lamp flash, buzzer ring
● Trouble state: power lamp flash, alarm lamp flash, buzzer ring
Installation picture
