Tungsten Cemented Carbide Composite Rod , Carbide Welding Rod Use
In Endmill
Specification of carbide composite welding rod
| Grade | Chemical composition |
| Cu+Zn+Sn | WC | Co |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
| Grade | Chemical composition |
| Ni+Zn+Sn | WC | Co |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1 |
Production of carbide composite welding rod
(1) clean up the workpiece, make the welding workpieces surface
with metallic luster.
(2) the flat position of welding, therefore can use the appropriate
clamping fixture for control of surfacing layer thickness
(3) with a neutral flame preheating, flame core not contact
surface, the distance to 25 mm is advisable.
(4) carbide surfacing welding layer.With YD type electrode
surfacing, the use of neutral flame (can be slightly carbonizing
flame) tip is steady on the workpiece surface movement, the flame
of the alloy electrode heating (be careful not to make flame cone
tip contact alloy particles), tire body in the electrode alloy
melt, carbide particles are also falling.Before the tire body of
molten metal solidification, the particles arrange, can use left
hand of the alloy electrode fingers, or another person holding a
base electrode or pull rod on graphite rod in a quick stir
particles, making them evenly aligned neatly.Surfacing layer
thickness control according to the requirements of design.
(5) after the workpiece welding, where no ventilation, slow
cooling, cannot quench, conditional usable asbestos blanket cover.
(6) the workpiece after cooling to room temperature, if necessary,
grinding surface surfacing to required size and shape.
(7) clean up the workpiece, remove all splash, slag, etc.
Application of carbide composite welding rod
1, carbide composite welding rod is mainly used for surfacing
welding the oil, mining, coal mining ect.
2, and used for other industries in some serious wear and tear or
artifacts of both cutting.
2, such as: milling shoes, grinding, centralizer, reamer, drill
pipe joints, hydraulic cutter, scraper, plough planer knives, core
bit, piling drill, twist drill, etc.
