Nitrile Stainless Steel Diaphragm for 1 1/2 Inch Autel Type Pulse
Valve
The air is uniformly distributed avoid channeling Initially a coat
of material forms on the bags Subsequently, the coat acts as the
filtering medium. The dust is accumulated on filter elements while
the air passes thorough the filter bags from outside to inside. the
accumulated powder is dislodged from the bags by reverse pulse-jet
air intermittently. The dislodged powder falls on bottom cone and
is discharged through powder discharge valves. The dust free air is
sucked by induced draft fan and is exhausted to atmosphere.
Suitable for dust collector applications, in particular for reverse
pulse jet filter cleaning and its variations, including bag
filters, cartridge filters and envelope filters, ceramic filters
and sintered metal fibre filters.
| Model | 1 1/2" pulse valve diaphragm |
| Material | Nitrile Rubber |
| Working ambient temperature | -20℃ to 80 ℃ |
| Working pressure | 0.2Mpa to 0.6Mpa |
| Working medium | Clean air |
| Life expectancy | over 1 million times or 3 yeas |
Detailed datas for reference
Live picture of dust collector
That kind of double diaphragm electromagnetic pulse valve how to
work ah, do you know the advantages?
Double diaphragm pulse valve is a valve body, valve body, valve
cover, the diaphragm and the control of diaphragm, the compressed
air into the pulse valve chamber, at the same time through the
orifice, respectively, into the chamber, the chamber pressure equal
protection by electromagnetic valve is closed, the control right
and the right side of the main diaphragm of diaphragm pressure area
is greater than the left, and the effect of spring, were closed,
the relief port output filter bag is not blowing, when electric
instrument signal, control solenoid valve open diaphragm chamber on
the right side of the compressed air discharged into the atmosphere
by the electromagnetic valve, the pressure is lower than the
control of diaphragm on the left side of the room, make the control
to the right of diaphragm and open the relief port, The compressed
air in the right chamber of the main diaphragm is discharged into
the atmosphere, and its pressure is lower than that of the left
chamber of the main diaphragm, so that the main diaphragm moves to
the right, and the compressed air is ejected from the left chamber
of the main diaphragm to the output outlet, so that the filter bag
is sprayed.
Are there air holes on the side and in the middle of the pulse
valve diaphragm?
Select pulse valve diaphragm can not simply look at membrane pores
in what position, but also look to and supporting the use of pulse
valve diaphragm in porosity in what position, if the pulse valve in
stomata in the edge edge will use in porosity of the diaphragm to
match, if there is no loophole edge of pulse valve should be used
with porosity of diaphragm, if you don't corresponding pulse valve
and the membrane pores, can cause air flow is not smooth, pulse
valve can't work normally, be sure to check carefully!
We will wait for you at anytime
