Automatic Blow Moulding Machine For HDPE PP 20L Plastic Jerry Can
Introduction
The hdpe extrusion blow molding machine , A wide variety of
materials can be used for the machine, which are suitable for
producing 10-20L PE bottle. The clamping system is a high-precision
double-station linear guide, extrusion system using a hard gear
reducer and inverter. The die head system adopts central-incoming
extrusion die made of special steel, imported hydraulic valve and
seal parts with proportional control valve.The control system
consists of PLC and Human-machine interface imported from Japan,
and automatic temperature control module and imported electrical
parts.
1. The screw design of high-performance mixing, to ensure uniform
plasticized.
2. The extruder adopts frequency conversion motor drive, the
machine energy consumption.
3. horizontal clamping action moves, run by linear slide.
4. clamping cylinder in the middle position the template so that
even by force, improve product quality, extend die life cycle.
5. opening and closing of the mold made of high strength guide bar
control, increase the clamping force, providing high stability of
the machine operation and high efficiency.
6. Rugged and efficient FIFO type accumulator die, precise
distribution of the material within the die, so that change color
or refueling is easy.
7. The advanced design eliminates material degradation in the flow
channel, and helps to avoid cavities drawdown, eliminate weld
lines.
8. Precision Micro-time process control to ensure that products
fully meet the requirements, reduce product weight, shorten the
production cycle.
9. can be moved back and forth out of institutions designed to make
quick and easy replacement of the mold.
10. Multifunction next blow blowing seat, easy molding specific
products.
11. Innovative mechanical arm designed to automatically remove the
finished product.
Parameter
SPECIFICATIONS & TECHNICAL DATA |
| Screw Diameter | mm | 75 |
Plasticizing Capacity | Kg/hour | 90 |
Temperature Control Zone | No. | 5 |
| Single Head Max Die Diameter | mm | 230 |
Double Head Central Distance | mm | 230 |
Triple Head Central Distance | mm | 160 |
Four Head Central Distance | mm | 120 |
| Clamping Force | KN | 180 |
Platen Size | mm | 500x550 |
Opening Distance | mm | 250~750 |
Moving Distance | mm | 560 |
Max Mould Size | mm | 600x500 |
| Extrusion Motor Power | KW | 30 |
Pump Motor Power | KW | 11 |
Machine Total Power | KW | 72 |
Average Power Consumption | KW | 37 |
