10 Liter Extrusion Blow Molding Machine Plastic Bottle Jerry Can Making

10 liter plastic bottle jerry can extrusion blow molding machine

Introduction

1. Suitable products
1~30L PE, HDPE, PP bottles,jerry can,barrels...
Applications: milk/ yogurt bottles, food pack containers, plastic jars, chemical bottles, cosmetic bottles, lubricant oil bottles, household bottles, detergent bottles, shampoo bottles, oil bottles...
2. Station
The machine is double station double head, cycle time 19s,
per hour can make 360pcs bottles, and per day can make about 8640pcs bottles(basis on 4L bottle),
If customers do not need so much production, we also have smaller single station single head machine, per day it can make about 4320pcs.
( our engineers will make complete solutions according to customers bottle and capacity demands.)
This machine also can produce 15L 20L barrel,each hour capacity is 90-95pcs.Each day capacity is about 2280pcs.

3. Die head
This machine is using single die head to make 10-20L barrels.
However, the die head can also be changed to double die head, triple die head and 4 head to be able to make other smaller size bottles.

Single die head (10~20L)
Double die head (3~5L)
Triple die head (0~750ml)
Four die head (0~300ml)

Changing the die head system takes around 1.5~3h, this also included heating time.

4.Mould - Aluminium 7075# inserted beryllium copper or 4Cr13 stainless material
the best blow molding mould material, aluminium mould has good cooling, and beryllium copper is very durable as well.
4Cr13 mould materal is good strength with longlife time use.

5.Parison control system is a program to change the parison thickness,As the plastic is extruded from the die head,the programming can:
1. Reduce the plastic use
2. Improved wall thickness distribution
3. Reduce cooling time

Feature

1. Electronic control system: Japanese Mitsubishi PLC computer plus man-machine interface (Chinese or English) red paper, touch-screen operation. All process settings, changes, search, monitoring, fault diagnosis and other functions are achieved on the touch screen, no contact with the working principle, components and durable.

2. Hydraulic system: proportional pressure control, equipped with imported brand-name hydraulic components, stable and reliable.

3. Plasticizing system: efficient plasticizing mixing screw, plastic plastic to ensure adequate and uniform.

4. Speed control system: frequency control + alloy steel gear reducer, smooth speed, low noise, durable.

5. Opening and closing mode, mobile system: beam arm, three o’clock, the center of the mold clamping mode, to ensure long-term use. Clamping force balance, no deformation, and the use of translation mode body (ball linear guide), high precision, less resistance, faster.

6. Blowing needle holder: the overall angle-type blowing needle holder, stable and not shift, to ensure that products cut smooth.

Components list

Parameter

Company Introduction

ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak tester,bottle neck cutting machine ,cap liner,bagger packing machine and many kinds of labeling machine. All the products are sold well in every province and city of the whole country and also exported to about thirty countries and areas with strong technical force, advanced equipment, scientific management system and perfect after-sales service.

Company culture