Caps lining machine adopts TPE(Thero-Plastic Elastomer) as raw
material to make sealing gasket.It is especially for soft
drink,soda water,juice beverage these caps production.The function
is to prevent the liquid and gas from leakage.
This machine had the advantage of high capacity,easy operation and
energy saving,well resist pressure and keep the taste fresh.
Furthermore,the pad produced with it is smooth and beautiful. The
bottle cap with it opens easily and seals tightly.
Features
1. It replaces the handwork, avoids secondary pollution on the
materials.
2. It adopts Siemens PLC which can ensure stable performances.
3. The machine can reject the defect caps automatically.
4. The sorting cap system puts the messy bottle caps in order, and
makes all caps upward.
5. The machine can stop feeding automatically when caps are over
supplied.
6. The system stops and alarms when caps are in short supply.
7. The machine can stop automatically when it reaches the output
that has been set in the system.
8. Automatically alarm and stop when breakdown occurs.
Parameter
1 | Cap Diameter | 15-38 mm |
2 | Cap Height | 7-25 mm |
3 | Productivity | 10000-12000 pcs/h |
4 | The Power of Extruder Heating Ring | 2.5 KW |
5 | The Power of Extruder Electro-Motor | 2.5 KW |
6 | Installed Electrical Power | 15 KW (50HZ) |
7 | Consumed Electrical Power | 8 KW |
8 | Compressed Air Consumption(Approximate) | 600 NL/min |
9 | Color | Yellow,blue |
10 | Size | 2600(L)×990(W)×1550(H)mm |
