NEW Bently Nevada 3300 XL 8MM Proximity PROBE 330101-00-08-05-02-05
Transducer System
Description
Proximity Probe and Extension Cable
The 3300 XL probe and extension cable also reflect improvements
over previous designs. A patented TipLoc* molding method provides a
more robust bond between the probe tip and the probe body. The
probe’s cable incorporates a patented CableLoc* design that
provides 330 N (75 lbf) pull strength to more securely attach the
probe cable and probe tip.You can also order 3300 XL 8 mm probes
and extension cables with an optional FluidLoc* cable option. This
option prevents oil and other liquids from leaking out of the
machine through the cable’s interior.
Transducer System
The 3300 Proximity Transducer System consists of:
- a 3300 XL 8 mm probe or 3300 5 mm probe
- a 3300 XL extension cable
- a 3300 Proximitor Sensor
The system provides an output voltage directly proportional to the
distancebetween the probe tip and the observed conductive surface.
It is capable ofboth static (position) and dynamic (vibration)
measurements, and is primarilyused for vibration and position
measurement applications on fluid-filmbearing machines, as well as
Keyphasor and speed measurementapplications.
The system provides an accurate, stable signal output over a
widetemperature range. All 3300 Proximity Transducer Systems
achieve thislevel of performance while allowing complete
interchangeability of probe,extension cable, and Proximitor Sensor
without the need for individualcomponent matching or bench
calibration.
Ordering Information for Probes
3300 XL 8 mm Proximity Probes:
330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor2
330102 3300 XL 8 mm Probe, 3/8-24 UNF thread, with armor2
Part Number-AXX-BXX-CXX-DXX-EXX
A:Unthreaded Length Option
Note:Unthreaded length must be at least 0.8 inches less than the
case length.
Order in increments of 0.1 in Length configurations:Maximum
unthreaded length: 8.8 in Minimum unthreaded length: 0.0 inExample:
0 4= 0.4 in
B:Overall Case Length Option
Order in increments of 0.1 inThreaded length configurations:Maximum
caselength:9.6 inMinimum case length: 0.8 inExample: 2 4 = 2.4 in
C:Total Length Option
05 0.5 meter(1.6 feet)
10 1.0 meter(3.3 feet)
15 1.5 meter(4.9 feet)
20 2.0 meters (6.6 feet)
30 3.0 meters (9.8 feet)
50 5.0 meters (16.4 feet)
90 9.0 meters (29.5 feet)
Note:
3-meter length option is only available on 330101 probes, and are
designed for use with the 9 meterProximitor sensor only.
5-meter probes are designed for use with the 5 meterProximitor
sensor only.
D:Connector and Cable-Type Option
01 Miniature coaxial ClickLoc connector with connector protector,
standard cable.
02 Miniature coaxial ClickLoc connector, standard cable.
11 Miniature coaxial ClickLoc connector with connector protector,
FluidLoc cable.
12 Miniature coaxial ClickLoc connector, FluidLoc cable.
E:Agency Approval Option
00 Not required
05 CSA, ATEX, IECEx Approvals
