Galvanized steel pipe close to the ground fitness equipment for open area KP-E037

How to solve the common faults of playground equipment

Playground equipment has developed rapidly in recent years. A large number of playground equipment manufacturers have shipped to investors. From delivery to operation, they have brought very good income to investors, and the amusement market has also caused amusements due to safety issues. The equipment in the field is faulty. The playground equipment is a special kind of equipment. Due to factors such as quality, running time, passenger capacity, parts wear or looseness, the equipment may malfunction. The following is a brief introduction to common faults and emergency methods for playground equipment:

Can't start
cause of issue:
First, the electric control cabinet and the line problem: If the general equipment can not be started, then the first check is whether the power is on. If the light is on, it means that the equipment power supply is connected to the control cabinet. There is no problem, then check the control cabinet to check the knife. Or if the fuse is blown, if the indicator light is off, you need to check whether the line of the control cabinet is disconnected or shorted. If found, please replace the line immediately.

Second, check whether the motor is faulty: the fault of the motor must be excluded in the case where the fault is not present, and then the problem of the motor is checked. If it is preferred to check multiple motors, it needs to be checked one by one, and then check. Whether the motor rotates during the opening process. If it is found that it does not rotate, then we need to contact the playground equipment manufacturer for replacement. If it turns, then we will check whether the equipment is loose or worn.

2. Startup is not smooth
cause of issue:
Under normal circumstances, there are three points in this situation. The first is that the long-term friction causes the equipment to wear seriously and the start-up is not good. The second is the voltage instability. For the mobile operators, the voltage instability is a common problem. Then we need to replace the larger squared line or replace the access point. The third is that the triangle belt is loose, then we need to adjust the distance between the motor and the pulley to solve it!

3. The operation sound is too loud
cause of issue:
In general, the running sound is too large. Generally, the mechanical part distance is not adjusted well. The connection is not done well. The first is whether the gap is too large or too small during the installation, and then adjust according to the situation. Then check whether the equipment is placed. Leveling, if it is found that the ground is not flat or the air pressure is insufficient, etc., it is necessary to adjust. Finally, check whether the friction between the rotating part and the bearing becomes large, and increase the lubricating oil appropriately.

Playground equipment failure prevention and how to find faults

1. Common equipment failures in playground equipment. (1) Sudden shutdown; (2) Mechanical break; (3) Falling from high altitude.

2. The cause and prevention of the malfunction.
The playground equipment is composed of several systems. The causes of the faults are very complicated, mostly caused by improper maintenance or not. Therefore, the prevention of failures is focused on strengthening daily maintenance and regular inspections.

3. Emergency points.
(1) When there is physical discomfort during the play and feel unbearable, the staff should be reminded to stop the machine in a timely manner.
(2) When there is an abnormal shutdown, do not tamper with and release the safety device yourself. Keep calm, listen to the staff and wait for rescue.
(3) When there is an emergency such as accidental casualties, avoid panic, squatting, and crowding, and organize evacuation in time.
4. Expert tips.
(1) When visiting tourists, you must first carefully read the "Guide to Tourists", listen to the staff to explain, master the key points of play, high blood pressure, heart disease and other personnel do not play with the project that is not suitable for their own body. Leading minors to play a good role in monitoring.
(2) Any playground equipment has corresponding safety protection devices. When equipment failure occurs, it is the best choice for tourists to keep calm and obey the command. Waiting for rescue is the best choice for tourists, and can reduce the severity of accidents and even avoid personal injury accidents.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.