IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers
1. Introduction
The probe for measuring surface temperature is designed according
to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6.
It’s mainly used to test the temperature rise of the front and side
of the cooker, oven and tumble dryers, 4N force is applied
according to the standard.
2. Parameters
| Copper Sheet | Φ5mm*0.5mm (thickness) |
| Thermocouple | Φ0.3mm, K type made by OMEGA |
| Insulated Pipe | Polycarbonate, inner diameter 3 mm, outer diameter 5 mm |
| Handle | With 4N thruster |
3. Usage
1) . The test shall be carried out after the test corner test is
completed.
2) . The equipment under test should be powered for 60mins or it
reaches a steady state before test.
3) . The top of the probe was pressed against the surface of the
device under test, and a 4 N force should be applied until the
temperature was stable.
4. IEC60335-2-11 figure 101
5. OUR ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our
goal is to provide our customers with better price, better quality
and better service.
2). Customized Service: We can help our customers to design and
develop new equipment according to their requirement. We are
flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test
before delivery. And all our products can pass the third-lab
calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours
technical support by email. Our professional team is always here
willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and
our freight forwarder can provide transportation services at the
most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers
within 24 hours
