PR40 5 Inch RC DTH Hammer , Alloy Steel Mining Drilling Tools High
Crush Function
RC series reverse circulation DTH Hammer is the latest developed
product of our company. It is mainly used for deep exploration
drilling and ore grade control.
R.C. Drilling, referred to as "Centre Sample Recovery"or "Dual Wall
Drilling", employs a Dual Wall PIpe where the drilling medium,
normally high pressure air, is passed between the outer and inner
tubes down to the face of the drilling bit where it is returned up
the centre tube along with the sample cut by the drill bit.
RC hammers and bits are used in hole drilling in mines, hydrology
and water well, geothermal well, geothermal air conditioning well,
geologic exploration, gravel stratum, etc Especial suitable for
complicated formation (Formation loose, difficult to drilling and
unstable of hole wall), exhausting for deep hole, environment
protection.
| Length(without bit) | Weigth(without bit) | External diameter | Bit Shank | Hole range | Connection Tread |
| 1362mm | 80.5kg | φ120.5mm | PR40 | φ124-φ142 | 3.5"-4.5"Remet
3.5"-4.5"Metzke |
| Working Pressure | Impact rate at 1.5Mpa | Recommended rotation speed | Air consumption |
| 1.7Mpa | 2.4Mpa | 3.0Mpa |
| 1.5-3.5Mpa | 35HZ | 25-40r/min | 16m³/min | 22m³/min | 28m³/min |
THE USE AND THE ADVANTAGES OF THE R.C. DTH HAMMER:
No contamination
The R.C. System collects sample throungh the recovery holes in the
face of the drill bit immediately as the cuttings or sample is
formed. The drilled sample does not have to travel the length of
the hammer where contamination and loss of sample takes plasce.
Higher Production
In broken and fractured ground conditions, the R.C. will often out
perform the conventional hammer in terms of penetration rates.
Dry Sample
Even in certain water bearing stratas it is still possible to
collect ad dry sample because the cuttings(sample) are collected as
they are formed through the face of the drill lbit.
Higher Sample Recovery
Because the sample is collected throungh the face of the drill bit
there is no loss of sample when drilling through broken or
fractured ground. And since the bit matched to the chuck size,
there is very little bypass of sample and recovery rates of up to
98% are generally achievable.
FAQ
Q1: Are you trading company or manufacturer ?
A: We are manufacturer (factory).
Q2: How long is your delivery time?
A: Generally it is 5-15 working days if the goods are in stock. Or
it is 20-30 working days if the goods are not in stock, it is
according to the quantity.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q4. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q5: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
