HJF 650 ton injection molding machine
Introduction:
1.Reliable plastic injection machine with servo motor ,equiped with
servo motor , closed loop control for pressure and flow .Low
noise,high precision and energy saving .
We design,manuafcture and supply our own brand of injection molding
machine called "Haijiang" with clamping force ranged from 800kn to
30000kn, injection weight from 90g to 40000g, and can provide
custom-built machine.
2.Inject all kinds of plastic parts, bottle preform, engineering
plastic, UPVC, PVC, PE pipes fitting, pomponents for automotive,
household, eletronics, telecommunication, ETC
Features of injection molding machine:
1.Equiped with servo motor ,
2.Closed loop control for pressure and flow .
3.Low noise,
4.High precision
5.Energy saving .
Electronically Controlled Unit
1.CPU controller and display are independent and reliable.
2.A larger color LCD screen enhances clear display and supports
multi-language compatibility.
3.The control system also supports remote monitor. In the event of
a control problems, the machine can be connected to internet
through a special interface. Inject service can realize remote
fault diagnosis and maintenance.
4.A screen saver function extends the LCD life.
5.Ultra bright LED is provided for input and output point
inspection. Proving convenient indication of the machine’s
operation and machine service
6.A data hardware lock is provided to prevent unauthorized people
from effecting the machines performance.
7.Closed Loop PID barrel temperature control.
8.Dust and waterproof control cabinets provide a neat and tidy
enclosure all electrical control components.
| SPECIFICATION | HJF650 |
| Screw Type | A | B | C | D |
| Screw Diameter | Mm | 90 | 95 | 100 | 105 |
| Screw L/D Ration | L/D | 20 | 19 | 18 | 17.1 |
| Shot Size(Theoretical) | cm3 | 2800 | 3117 | 3454 | 3808 |
| Injection Weight(PS) | g | 2517 | 2805 | 3108 | 3427 |
| Injection Rate | g/s | 552 | 612 | 679 | 748 |
| Injection Pressure | MPa | 184 | 165 | 149 | 135 |
| Screw Speed | rpm | 150 |
| Clamping Force | KN | 6500 |
| Opening stroke | Mm | 890 |
| Space Between Tie Bars | mm | 890*890 |
| Max.Mold Height | mm | 900 |
| Min.Mold Height | mm | 350 |
| Ejector Stroke | mm | 250 |
| Ejector Tonnage | KN | 150 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 55 |
| Heater power | KW | 42.95 |
| Machine Dimension(L*W*H) | M | 10.2*2.24*2.71 |
| Machine weight | T | 28 |
| Oil Tank Capacity | L | 1300 |
Haijiang Machinery Main configuration
Standard machinery
| PLC | TECHMATION (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Yuken(JAPAN)/Tokimec(JAPAN)/Vickers(USA) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | Schneider(France) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA)/Schneider(France) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Yuken(JAPAN)/Tokimec(JAPAN)/Vickers(USA) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
