Machine List:
| No | Name | Type | quantity |
| 1 | 5 ton passive de-coiler | RF-RP18-63.5-825 | 1 set |
| 2 | Main roll forming machine | RF-RP18-63.5-825 | 1 set |
| 3 | Control box | RF-RP18-63.5-825 | 1 unit |
| 4 | Hydraulic station | RF-RP18-63.5-825 | 1 unit |
| 5 | Passive Out tables | RF-RP18-63.5-825 | 2 units |
| 6 | Mesh cover | RF-RP18-63.5-825 | 1 unit |
Details of each part:
1. Cutting
(1) Cutting after forming: Cut the sheet after roll forming to
required length
(2) Cutting motion: The main machine automatically stops and the
cutting will take place. After the cutting, the main machine will
automatically start.
(3) Material of blade: CR12with heat treatment
(4) Length measuring: Automatic length measuring
(5) Tolerance of length: 10m+/- 2mm
2. Out table:
Size:2000*1350*1000mm, two sizes
3. Control Box: Panasonic
(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the
requestment)
(2) length & quantity measurement automatically;
(3) length & quantity controlled by PLC,
(4) Length inaccuracy can be amended easily.
(5). Control panel: Button-type switch and touch screen
(6) Unit of length: millimeter (switched on the control panel)
