Anti-rust 304 Stainless Steel Vertical Swing Turnstile Gate For
Crowd Control System
Description:
Swing Barrier, via access control system, can be connected with ID
cards, IC cards, magnetic cards, barcode cards etc. The integration
system ensures passing in order and will never allow unauthorized
persons to go in or go out.
Features of Pedestrian Swing Gate
1. Stainless steel housing, rain-proof laser opening, novel and
beautiful.
2. LINIX (the best micro-motor brand in China) brush-less DC motor
is used and the surface is electroplated.
3. Length of arm: 500mm to 800mm.
4. Fault detection and alarm functions, easy to use and
maintenance.
5. The running status can be programmed and controlled with the
built-in keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop working automatically within
the prescribed time and reset again after the default delay (till
fully reset).
7. Anti-breakthrough function. The gate is locked automatically
until opening signal received.
8. Synchronization functions (for dual gate equipment).
9. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds), the system will
cancel the authority of the current user automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Via dry contact signal)
12. Direction can be set as unidirectional or bidirectional.
13. The device can be connected to management computer to realize
remote control and management.
14. LED direction indicator supported
15. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
16. Support infrared photocell for anti-pinch and reset function.
Product dimension
Specifications of Pedestrian Swing Gate
| Product | swing barrier gate |
Power supply | AC220±10%V 50Hz/AC110±10% 60Hz |
Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V impulse signal, driving current > 10mA |
Motor voltage | DC 24V (brush motor) |
Max flow rate | 25 to 30 person per minute |
Gate swing angle | 180 degree |
Gate opening speed | 1.5s |
Reset time when power on | 3s |
Working temperature | -20°C~+60°C |
Product photo:
Case reference
Our service
Free visit to our factory.
Reply your inquiry in 24 working hours.
Professional staff answer your questions in English.
Customized design is available,we can accept OEM & ODM.
Unique problems can be made solution by our professional engineers.
Special discount and protection of our distributors or agents in
their area.
