Description:
Double Shaft Shredder with loading hoppers, equipped with high
quality cutters with low rotation speed for a lower energy
consumption and noise reduction. It incorporates two
counter-rotating shafts that intermesh with each other(2 shafts
with sharp elements constituted by sharp-corners disks provided
with hooks); Every hook has the task to hook the product and
drive-it by the action of the two counter-rotating shafts). The
material is powerfully torn and shredded by the talons of the
cuttings discs. Specially designed rotor makes the shredder be
extremely wear resistant.
Double Shaft Shredder Blades(According to different materials
choose different blades ):
Technical Data for double shaft shredder :
| Model | ST-800 | ST-1200 |
| Capacity(T/hour) | 0.8-2 | 2~4 |
| Specification of feeding(mm) | ≤800 | ≤1200 |
| Specification of discharging(mm) | ≤50x50 | ≤60x60 |
| Main Motor(Kw) | 37 | 45x2 |
| Discharging Motor (Kw) | 3 | 4 |
| Cutter rotate speed(r/min) | 16 | 10 |
| Screener rotate speed | 6 | 4 |
Technical Features:
1. Our shredders can be employed as either a primary or secondary
shredder and can be seen working anywhere from the waste management
company to biofuel producers;
2. Dual shafted, slow-speed, high-torque waste shredder with
hardened steel cutters;
3. The two cutting rotors powerfully grab the feed material, and no
matter the feed material is large piece of hard plastic or heavy
tires, this machine can easily shred them into small pieces;
4. Double shaft shredder is able to process a number of different
materials; shredder is designed with a powerful engine, long
working length and aggressive input, Internal feeding volume bigger
than traditional and common single shaft shredder machine and allow
you using forklift truck to feed.
5. Heavy structure: the frame and structure of our shredders are
made of high-thickness sheets and tubular. Blades are manufactured
from high quality steel, suitable for shredding tough materials and
for extra long life;
6. Depending on requirement, these discs (blades) are available in
a wide range of quantities, qualities and shapes with the new
double-shaft shredder;
7. Any overloads caused by foreign material are sensed by the PLC
controller and cause the shaft rotation to stop and reverse
direction to clear the foreign matter, and then resume;
8.Cutters removal and replacement can be carried out safely and
simply.
9. Our shredders Use a planetary reducer, not a traditional
gearbox, and the planetary gearbox has the following advantages:
High Efficiency, Greater Stability, Compact Size, Higher Torque
Density, Cost Effective Precision, High Radial Loads.
10. Cooler system(optional) can maintain the temperature for
continuous operation.
