Four Rows Cold Steel Storage Shelving Racks for Factory Warehouse
The double deep rack is a type of rack that uses a scissor forklift
to design in parallel. According to the structure, it belongs to
the pallet type rack and the number of layers is generally more
than 4 levels. Double deep shelves store two rows of unit cargo on
one or both sides of each lane, meaning that there are four sets of
high-rise pallet racks between the two adjacent channels. It is
suitable for fast-moving consumer goods warehouses and freezers in
bulk shipments, such as:
Plastics industry,
Paper industry,
Tobacco,
Food and beverage,
Packaging and other industries
The warehouse has high utilization rate and good selectivity. It
adopts special forklift and the lane size is the same as that of
APR. It is widely used in paper industry and plastic products
industry. Due to low beam height, the operating height can reach 8
meters. It is suitable for warehouses with low pick-up rate. The
ground utilization rate is 42%, which is higher about 20% than
ordinary racks. However, due to the narrow lane, it is necessary to
use three-way stacking trucks, and the cost of forklifts is high.
Basic components: Upright, Beam, Diagnal Bracing, Horizontal
Bracing.
Features/Advantages
1. Beam height is a bit low , and the operating height can reach to
8 meters.
2. Medium inventory flow, providing 50% optionality.
3. Applicable to warehouses with low pick-up rate, the ground
utilization rate can reach to 42%.
4. Increase the inventory compare with ordinary beam-type shelves.
5. The forklift channel needs to be around 3.3 meters.
6. Advanced access mode, it is difficult to achieve first-in,
first-out.
Specifications of Double Deep Rack
| 1) Item | Four Rows Cold Steel Storage Shelving Racks for Factory Warehouse |
| 2) Item No.: | SII-DR161 |
| 3) Type: | Double Deep Pallet Rack |
| 4) Loading Weight: | ≥1000KG per level, designed according to specific requirements |
| 5) Material: | Steel Q235B |
| 6) Surface Finish: | Powder Coating |
| 7) Size: | Custom |
| 8) Component: | Beam, Upright Frame, Brace |
| 9) Supply Ability: | 300-400 ton per month |
| 10) Sample Time: | About 7-10 working days |
| 11) Beam with Frame: | 1.Frame depth normally from 800-1000mm, height is limited by
handling equipment of approximate 11mm.
2. Beam length from 1000-3300mm depends on requirement or design.
3. Operation aisle is about 3.3 meters. |
Due to the special nature of the product, we do not support direct
online ordering. Please contact us to before purchasing.
