8x10 double twisted hot dipped galvanized hexagonal woven steel
gabion Mesh
Description:
Metal Gabion-Netting is metallic wire mesh rock fall netting used
to prevent rock and debris from falling on to road and railways,
since the double-twist, hexagonal-woven mesh does not unravel when
some wires break. This is achieved by joining together rolls of
mesh fabric with lacing wire and using it as a blanket to cover
slopes obstructing rock falls. Fractured stones are trapped and
confined against the slope should isolated wires fatigue from
prolonged stress. This solution can also help in establishing and
protect infrastructure.
Additionally, this double-twisted hexagonal type of netting has the
high mechanical resistance required to prevent the danger of sudden
rock shock loads and dissipate rock fall energy created from loose
fractured rock.
gabion retainning walls-GRW001 | 
gabion retainning walls-GRW002 |
Wire
All tests on wire must be performed prior to manufacturing the
mesh. All wire should comply with ASTM A975-97, style 3 coating,
Galfan and PVC coated steel wire. Wire used for the manufacture of
Gabions and the lacing wire, shall have a maximum tensile strength
of 75 000 psi (515 MPa) as per ASTM A856-03, soft temper steel.
FEATURES:
- Economic.
- Just fill the stone into the Gabions and seal it.
- Simple installation.
- No special technology needed.Weather proof under natural destroy,
corrosion resistant.
- No collapse even under big scope of deforming.
- Sludge in the stones is good for plant growing.
- Mixed to form a integrity with the natural environment.Good
permeation can prevent the damage by hydrostatic.
- Less transport freight. It can be folded together for transport and
further installation.
- Specifications:
| Gabion Box Size | 0.5m x 1m x 1m | 1m x 1m x 1m | 1m x 1.5m x 1m | 1m x 2m x 1m |
| Wire Diameter | 3mm | 4mm | 5mm | 6mm |
| Double horizontal wires style is available |
| Mesh Hole Size | 50mm x 50mm | 50mm x 100mm | 37.5mm x 100mm | 75mm x 75mm |
Can be customized according to demands of customers. |
| Nominal Box sizes ( m) | No. of diaphragms (no.) | Capacity per box (m3) |
| 1.0 × 1.0 × 0.5 | Nil | 0.50 |
| 1.0 × 1.0 × 1.0 | Nil | 1.00 |
| 1.5 × 1.0 × 0.5 | Nil | 0.75 |
| 1.5 × 1.0 × 1.0 | Nil | 1.50 |
| 2.0 × 1.0 × 0.5 | 1 | 1.00 |
| 2.0 × 1.0 × 1.0 | 1 | 2.00 |
| 3.0 × 1.0 × 0.5 | 2 | 1.50 |
| 3.0 × 1.0 × 1.0 | 2 | 3.00 |
| 4.0 × 1.0 × 0.5 | 3 | 2.00 |
| 4.0 × 1.0 × 1.0 | 3 | 4.00 |
How to install welded gabion box?
1. Ends, diaphragms, front and back panels are placed upright on
the bottom section of wire mesh.
2. Secure panels by screwing spiral binders through the mesh
openings in adjacent panels.
3. Stiffeners shall be placed across the corners, at 300mm from the
corner. Providing a diagonal bracing, and crimped over the line and
cross wires on the front and side faces. None are needed in
interior cells.
4. Gabion box filled with graded stone by hand or with a shovel.
5. After filling, close the lid and secure with spiral binders at
the diaphragms, ends, front and back.
6. When stacking tiers of the welded gabion box, the lid of the
lower tier may serve as the base of the upper tier. Secure with
spiral binders and add pre-formed stiffeners to exterior cells
before filling with graded stones.
APPLICATION:
- Control and guide of water or flood
- Flood bank or guiding bank
- Preventing of rock breaking
- Bridge Protection
- Water and soil protection
- Coast protection
- Seaport engineering
- Strengthening structure of soil
- Protection of road
Applications of gabion mattress
Advantages
1.Metal Gabion made of hexagonal double twisted wire mesh provide
adequate strength to the structure to withstand forces generated by
retained earth and flowing water.
2.The flexibility of the double twisted hexagonal mesh helps in
withstanding differential settlement without fracturing the
structure particularly when a structure is installed on unstable
and uneven ground or in an area where scours from waves or current
can undermine etc.
3.The permeable nature of the Metal Gabion eliminates buildup of
hydrostatic pressure behind the retaining structure and uplifts
caused by turbulent flows. Hence the thickness of the required
structure is significantly reduced.
4.Metal Gabion structures are heavy monolithic gravity units able
to withstand earth's thrust. Its efficiency increases instead of
decreasing with age since further consolidation takes place as silt
and soil collect on the voids and vegetation establishes itself.
Loading:
50-100pieces per pallets. with accessories.
Projects:
Welded gabion box is widely used in retaining wall structures,
rockfall and soil protection and so on. Welded gabions are filled
on site with hard and durable stone to form mass gravity
structures. And welded gabions are quicker and simpler to install
than woven mesh gabions.
Gabion Mesh-GM0001
Gabion Mesh-GM0002
PVC Coated Gabion Baskets-PCBG0003
PVC Coated Gabion Baskets-PCBG0004
