Ductile Air Release Valves ,Compound Exhaust Valve , ANSI 150 LB ,
HT200
PRODUCT INTRODUCTION
1. Description
CARX compound exhaust valve is used at the highest point of the
pipeline or at the place where the air is closed. It expels the gas
in the pipeline to dredge the pipeline and achieves normal work. If
the exhaust valve is not installed, the liquid flowing in the
pipeline generates dynamic heat which causes the gas to form a
short circuit and makes the outlet capacity of the pipeline fall
short of the requirement. Secondly, power cut and shutdown occur
when the pipeline is running. Pump pipe will appear negative
pressure, and will cause pipe vibration or rupture, exhaust
(suction) valve on the rapid suction of air into the pipe, to
prevent pipe vibration or rupture.
2. Principle of compound exhaust valve
When water is injected into the pipe, the plug stays in the open
position and exhausts a lot. When the air is exhausted, the
floating ball in the valve is floated, and the driving plug stops
exhausting a lot. When the water in the pipe is conveyed normally,
if a small amount of air gathers in the valve to a certain extent,
the water level in the valve drops and the floating ball goes down.
The air is discharged by small holes. When the pump stops, the
water in the pipe is empty, or when there is negative pressure in
the pipe, the plug opens and the air is sucked in to ensure the
safety of the pipeline.
3. Structure and application of compound exhaust valve
The CARX compound exhaust valve is a barrel shaped valve body,
which consists of stainless steel floating balls and plug heads.
CARX composite exhaust valve is installed at the outlet of Pump Po
or in the water supply and distribution pipeline to remove a large
amount of accumulated air from the pipeline, so as to improve the
efficiency of the water pipe and pumping unit. In case of negative
pressure in the pipeline, the valve can quickly suck in air to
protect the pipeline from damage caused by negative pressure.
4. Technical parameters of compound exhaust valve
1. Medium: clear water.
2. Temperature: normal temperature
3. body: grey cast iron HT200
4. Floating ball and stopper: stainless steel
5. Sealing material: butadiene rubber
6. Body test pressure: 1.5MPa
7. Float ball, seal test pressure: 0.05-1.1MPA no leakage.
5. Air Release Valve Drawing and Datasheet
Main dimensions of sewage composite exhaust valves
Model | DN(mm) | Size(mm) |
H | L | L1 | D | D1 | D2 | z-φd |
CARX-1.0
CARX-1.6 | 20 | 375 | 290 | 180 | 105 | 75 | 55 | 4-12 |
25 | 375 | 290 | 180 | 115 | 85 | 65 | 4-14 |
50 | 480 | 360 | 205 | 160 | 125 | 100 | 4-14 |
80 | 520 | 405 | 245 | 195 | 160 | 135 | 4-18 |
100 | 530 | 405 | 245 | 215 | 180 | 155 | 4-18 |
If you require other sizes and valve design standards, please send
email to angela@tjfmcn.com to get the drawing.
6. Valve Packing with Plywood
Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.
You will get an effective response within 24 hours from TongJiang
Team.
COMPANY PROFILE
floa
1. Our Factory
30 years experience of valve and pipeline industry.
10 senior technical engineers
20000 m2 production area
More than 100 employees to provide professional service.
As the reliable OEM for famous valve brand companies.
t ball valve
2. Factory Show
TONGJIANG Valve Technology Company was established for 30 years.
There are more than 100 employees which includes 10 professional
engineers.
OUR SERVICE float ball valve
Reliable Quality, Competitive Price
Reply your inquiry in 2 hours with professional service.
CONTACT INFORMATION
Miss Angela
Mobile: +86 13588429004(Whatsapp)
Skype: angelazhuo1
E-mail: angela@tjfmcn.com
Tel No: +86 571 86991717
Official Website: www.zjtjvalve.com
