Axial Flow Check Valve CF8M, WCB Double Flange ASME B16.10 , Class
300 LB
Check Valve PRODUCT INTRODUCTION
Check Valve Description
An axial check valve is the preferred solution for critical
non-return applications such as the protection of rotating
equipment and systems where low pressure loss, stable operation and
dynamic behaviour are essential. That means the Axial Flow Control
Valve is design for special applications requiring high flow
capacity, the precise control from a linear motion closure member,
and reduced turbulence and vibrational effects.
Due to the high capacity of the axial flow valve, several stages
can be used in order to reduce the noise level of these
applications. The crank-lever system design of the Axial Flow
Control Valve, transform a small torque into a big thrust, allowing
the valve to require smaller actuator sized, which in consequence
increases precision and speed of control.
These control valves can be equipped with actuators and valve
accessories such as positioners, limit switches, and solenoid
valves.
Axial Flow Check Valve advantages:
1. Low pressure drop and turbulence due to streamlined flow path
2. Tight shut-off with metal-to-metal sealing
3. Extremely long service life due to its inherent non-slam
characteristic
4. Very stable during operation due to smooth operating behaviour
5. Smooth and precise control that is friction free, backlash free,
and unaffected by dirt
6. Environmentally safe with zero emissions due to rotating shaft
7. Drive mechanism multiplier effect gives maximum thrust when it
is required.
Parameters of this Axial Flow Check Valve
Design Feature:
Easy opening
Spring protection
Stability
Hard face and fire safe
Non-slam operation
Low noise
Design Standard:
Design: API 6D/ASME B16.34
Face to face: API6D / ASME B16.10
Flange end: ASME B16.5 / ASME B16.47
Test: API6D / API598
Axial Flow Check Valve Specification
| Axial Flow Check Valve |
| Size Range | 1/2”~60” (DN15~DN1400) |
| Class Range | 150Lb~2500Lb (PN10~PN420) |
| Design Standard | API6D, ASME B16.34 |
| End Connection | RF/ RTJ - ASME B16.5 / B16.47; BW – ASME B16.25 |
| F - F Dimension | ASME B16.10 |
| Construction | Unibody |
| Design Features | Vent & Drain |
| Special | NACE |
| Material | Forged & Cast CS, LTCS, SS, AS and Special Steel |
| Applications | Oil & Gas, Chemicals, Waters, Power, Marine, Mining, etc. |
| Sample Photos | As follows |
Valve Outline Size Drawing
If you require other sizes and valve design standards, please send
email to angela@tjfmcn.com to get the drawing.
Valve Packing with Plywood
Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.
You will get an effective response within 24 hours from TongJiang
Team.
COMPANY PROFILE
floa
1. Our Factory
30 years experience of valve and pipeline industry.
10 senior technical engineers
20000 m2 production area
More than 100 employees to provide professional service.
As the reliable OEM for famous valve brand companies.
t ball valve
2. Factory Show
TONGJIANG Valve Technology Company was established for 30 years.
There are more than 100 employees which includes 10 professional
engineers.
OUR SERVICE float ball valve
Reliable Quality, Competitive Price
Reply your inquiry in 2 hours with professional service.
CONTACT INFORMATION
Miss Angela
Mobile: +86 13588429004(Whatsapp)
Skype: angelazhuo1
E-mail: angela@tjfmcn.com
Tel No: +86 571 86991717
Official Website: www.zjtjvalve.com
