Extremely Strong Round Neodymium Magnets For Generators Industrial Motor

NdFeB Permanent Magnet

Products details:

NdFeB Permanent Magnet production process:

Neodymium magnets are actually composed of neodymium, iron and boron (they are also referred to as NIB or NdFeB magnets). The powdered mixture is pressed under great pressure into molds. The material is then sintered (heated under a vacuum), cooled, and then ground or sliced into the desired shape. Coatings are then applied if required. Finally, the blank magnets are magnetized by exposing them to a very powerful magnetic field in excess of 30 KOe.

Neodymium block magnet, also known as rectangular magnet, square magnet or bar magnet, compared with disc magnet, block magnet is not as commonly used as disc magnet, but their straight line and clean edge offer a pleasing and different visual appearance, what's more, it provides a bigger surface area than disc magnet of same diameter.

Block magnet is usually magnetized with north and south pole on opposite square faces, also a multi poles magnetized block is possible with a new magnetizer machine.

Key Advantages of Neodymium Magnet:

• Neodymium Magnet are the most powerful commercially produced magnets.
• Neodymium Magnet have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe.
• Neodymium Magnet can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
• Neodymium Magnet has very high strength.
• Relatively low cost.
• Compared to Alnico and SmCo magnets, relatively easy to machine

Physical properties

     Yuyao Hongwei Magnetic Technology Co., Ltd.is located in Yuyao City, Zhejiang .Set up in 1995,it specializes in manufacturing NdFeB magnet,in eight years, through efforts by all members of our company,by renewing our developed equipment,completing manufacture technology and improve our products’ quality and capacities,pur annual turn-out reaches 300 tons,The company has passed the ISO9001 quality control system authentication.there are N35-N50, N33H-N48H, N33SH-N45SH, N27UH-N42UH, N27EH-N38EH series,and specifications form outside diameters Φ1.5-Φ180,inner diameters Φ1-Φ95,diamond 150×150×100,and we also process all kinds of products such as tilet,rapexia,diamond, ringy, sphericity and abnormity according to customer’s request. With advanced and completed process capacity,we can satisfy customer’s needs,products have been exported to America,Canada,Italy ,Singapore,Japan,Taiwan,Hongkong etc.and was recognized by customers,According to market’s needs,we have set up magnetic loop workshop,annual output reaches 3 million sets,and can design according to customer’s request.

     We also provide permanent magnetic ferrite lump and plastic magnetic slice to satisfy customers.We believe that quality,service credit standing are the premise of cooperation to friends both from home and abroad.