440A/440B/440C 1.4109/1.4112/1.4125 Stainless Steel Sheet And Slit
Strip Coil
The 440 grades form a series of high carbon martensitic stainless
steels.
They have basic corrosion resistance and extremely high hardness
and wear resistance.
| AISI/UNS | JIS | EN | DIN |
| 440A, S44002 | SUS440A | 1.4109 | X70CrMo15 |
| 440B, S44003 | SUS440B | 1.4112 | X90CrMoV18 |
| 440C, S44004 | SUS440C | 1.4125 | X105CrMo17 |
This 440 stainless grade combines the following characteristics:
- Basic corrosion resistance. Lower than other martensitic grades
like 431
- Very high hardness increasing with carbon content. 440C capable of
60 Rockwell HRC (~700 HV)
- Very high strength up to 2000 MPa UTS, 1900 MPa 0.2% PS
- Low elongation 4%
- Low toughness 10J
- Very high wear resistance
- Difficult to weld
- Difficult to machine
This series of grades give the highest level of strength/hardness
in any martensitic stainless steel.
Consequently, they are used where a basic level of corrosion
resistance is required coupled with high
wear resistance or blade sharpness. They are usually supplied in
the annealed condition for improved
machinability and then hardened and tempered to develop the high
hardness.
Applications
Bearings, valves, knife blades, surgical instruments, tools,
moulds, dies.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
