Non Leakage AODD Pump Air Operated Diaphragm Plate And Frame Filter
Press
AODD Pump Introduction
AODD Pump were designed to resolve numerous problems that pumpers’ face on a
job site. Whether you have limited space, are moving fluids with
mixed solids or compositions, or require a safe priming pump system
for your job, our AOD pumps provide a portable solution to get the
job done.
Operating through a dual-diaphragm fluid chamber, positive
displacement creates an air vacuum, initiating quick priming with
minimal effort. Once primed, air operated diaphragm pumps are
capable of passing up to 1-¼ inch solids (up to 90% solid
composition) and highly viscous fluids with ratings exceeding
25,000 cPs. AOD Pumps’ fluid handling, portability and durability
make them a versatile pump for any job application.
AODD Pump Parameters
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.83 |
| 2 | Maximum flow rate | 1/Min | 192 |
| 3 | Maximum lift | M | 70 |
| 4 | Maximum outlet pressure | Mpa | 0.83 |
| 5 | Maximum particle size | mm | 3 |
| 6 | Weight | kg | 12.3 |
| 7 | Noise level | db | ＜70 |
Air Operated Diaphragm Pump Application and Advantage:
Pneumatic diaphragm pumps are operated with compressed air .
diaphragm pumps is suitable for pumping fluids with particles, and
various liquids, which are highly viscous, volatile, corrosive or
toxic, as well as colloids. The pump body is made of aluminum
alloys, cast iron or stainless steel. The diaphragm is made of high
quality rubber such as Nitrile rubber, chloronorgutta rubber,
fluoroine rubber. The diaphragm pumps are widely used in the
petroleum chemical, electronic, ceramic, food and textile
industries.
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ···············································40°- 150°F
(4.4- 65.5°C)
Santoprene··········································-40°- 225°F
(-40°- 107.2°C)
··················································40°- 220°F (4.4°-
104°C)
Nitrile··················································10°- 180°F
(-12°- 82°C)
Viton·····················································-40°-
350°F (-40°-176.6°C)
Hytrel······················································-20°-150°F
(-12°- 93°C)
Kynar······················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene·············································32°-
175°F (0-79.4°C)
AODD Pump Application
