Farm Machinery Sheds Steel Frame Structure For Rural Steel
Buildings
Project information:
Farm Machinery Sheds Metal Warehouse Buildings For Rural Steel
Buildings. This is a Farm Machinery Sheds Steel Frame Structure For
Rural Steel Buildings. The steel frame structure of this light
steel frame structure sheds buildings is welded H-section steel
columns and beams that is connected by high strength bolts. Glass
wool sandwich panel is used as roof and wall insulation panels.
This kind of metal sheds could be used to store and maintain rural
machinery and vehicle. The main framework could be H-section steel,
steel square tube, truss steel. Steel frame structure buildings has
the advantages of wide span, large inside space, high strength,
light weight, low cost, short construction time, good effect of
insulation, good seismic performance, flexible layout,etc. It could
also be designed into lots types, such as gable type, arch roof,
truss steel roof, with or without doors and windows, with or with
cranes.
Name | Farm Machinery Sheds Steel Frame Structure For Rural Steel
Buildings |
Structure Type | Gable frame, single ridge, clean span or two spans |
Length Scope | 10- 150m |
Width Scope | 10-80m |
Eave Height Scope | 4-20m |
Roof Slope | 10% |
Gable Wall Column Spacing | 7.5m |
Roof | Sandwich panel or single layer steel cladding sheet |
Wall | Sandwich panel or single layer steel cladding sheet |
Door | Sliding door, roller door, lifting door. |
Window | Fixed window, sliding window |
| Ventilator | Unpower ventilator, electric ventilator, fans |
Material list and technical parameters for such kind of steel
buildings:
| Steel Frame | H section steel | Q235/Q345 steel 8mm/10mm |
| Welding | Automatic submerged arc welding |
| Rust removal | Sand blasting |
| Surface finish | Alkyd paint or galvanized |
| Intensive bolt | M20,Grade 10.9 |
| Supporting System | Angle brace | L50x4,Steel Q235, processed and painted |
| Horizontal brace | Φ20, Steel Q235, processed and painted |
| Column brance | Φ20, Steel Q235, processed and painted |
| Tie rod | Φ89*3, Steel Q235, processed and painted |
| Ordinary bolt | M12 Galvanized bolt |
| Roof | Purlin | C160*60*2.5,Steel Q235, galvanized and painted |
| Roof panel | Sandwich panel or corrugated steel sheet |
| Sky light | 6mm thick PVC |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Gutter | 0.4mm thick sheet steel profile or galvanized sheet |
| Down pie | Φ110PVC |
| Walls | Purlin | C160*60*2.5,Steel Q235, painted |
| Wall | Sandwich panel or corrugated steel plate |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Ventilation | Ventilation ball |
| Doors & windows | Rolling door/sliding door PVC/alu/steel/window |
Steel structure fabrication factory:
The floor space of our steel structre fabrication factory is
35,000㎡, and the workshop area is 20000㎡. We own three light/heavy
H steel production lines, BOX production lines, C/Z purlin
production lines and various types of profiling steel sheet
machines with advanced equipment such as plasma cutting machine.
Our service:
1. Structural steel fabrication, painting , galvanizing ,
pre-assembly
2. Designing, fabrication and installation for Prefabricated steel
structure building.
3. Deepen or design the fabrication drawing or shop drawing based
on your architectural drawing and construction drawing
4. Engineering consulting service
How to install:
We will provide installation drawing for each project to guide
installation. If you need, we could dispatch our engineer to
construction site to guide installation or we install it directly.
How to quote:
The following question we need to know before making the price.
Just feel free to fill what you know.
1 | Location (where will be built?) | _____country, area |
2 | Size: length*width*height | _____mm*_____mm*_____mm |
3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
4 | snow load (max. snow height) | _____kn/m2, _____mm |
5 | anti-earthquake | _____level |
6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be
suggested; . if not, the metal steel sheets will be ok. The cost of
the latter will be much
lower than that of the former |
8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting
height _____m |
