19 inch rack mounted 24 port fiber optic patch panel black
Main technical Parameter:
Environmental temperature: -25 - 65°C.
Relative humidity:≤85%((when the temperature is below 30°C)).
Atmosphere pressure:70~106Kpa.
Insulating resistance:≥2×104 MΩ/500VDC.
Voltage-resistance strength: Under the effect of 15kv/DC/1min,
non-puncture, and no arc-over.
The fiber optic splice tray could be piled one upon another,
flexible to turn.
The box are Rack Mounted, which is convenient to install and
dismantle.
The indoor type is of excellent seal performance, which could
prevent water from entering effectively.
Material properties
Fiber Optic Patch panel materials is corrosion resistance, stable physical and chemical properties;
all material must be compatible, and is compatible with optical cable
sheath and wiring pigtail sheath.
To prevent corrosion and other electrical damage, these materials
must be compatible with the other
equipment used in the patch panel
1. If the patch panel use engineering plastics, its combustion performance
shall be in accordance
with A GB/T5169.7 test, the test last for 30s.
2. optical fiber connector enhancement protector use materials and hot melt temperature filler shall
be not less than 120 °C, thermal softening temperature shall be not less than 90 °C, can be used in
a 25 ~+40°C temperature.
3. all materials should be non-toxic, non corrosive, on human health and other equipment element
side effects.
The appearance shall complete shape, no burr, no bubbles, no cracks
and voids, warping, impurity
defects. All the background color should be uniformly continuous.
Beautiful appearance and
convenient construction, low attenuation loss, reasonable structure, reinforced core is fixed in
the terminal box, the sheath has ground wire, suitable for fiber optic ribbon cable and indoor cable.
Unique design,19 inch rack or wall mount.
Feature:
Made of cold-rolling steel, static spreading-plastic, small
dimension and exquisite and easy for operation.
The box has a pothook, which is convenient to install and
dismantle.
The splice tray could be piled one upon another, flexible to turn;
the curve radius of the coiled spear fibers should be guaranteed to
be over 37.5mm in the splice tray.
The box is of unique structure, reasonable layout, and has adequate
room for operation.
Adjustable clamp seal ring and reinforce configuration, which could
adjust different sizes of cables flexibly to make sure the cables
are clamp tightly.
The indoor type is of excellent seal performance, which could
prevent water from entering effectively.
