3:1 Halogen-free Heat Shrink Tube With Glue , Dual Wall Tube , Heat
Shrinkable
1. Product Introduction
Halogen free heat shrink tube with glue is a thin wall heat shrink
tube which is lined a speical hot melting glue
inner tube , it is a heat shrink tubing with environmental sealing
capability for a wide variety of electrical applications ,
including automotive and marine wire harness , wire splices ,
breakouts, and connector-to-cable transitions . The out jack
material is irradated Polymer . The tube is Rohs approval .
3:1 shrink ratio
Longitudinal shrinkage < 5%
Not Flame Resistant
Super sealing against water , moisture or other contaminates
Continuous operating temperature : -45℃ - 125℃
Shrink Temperature : 125℃
2. Technical Parameter
PE Base Property
| Property | Test Method | Result |
| Tensile Strength | ASTM D638 | 10.3Mpa |
| Elongation | ASTM D638 | ≥300% |
| Dielectric Strength | ASTM D149 | ≥ 15kV/mm |
| Volume Resistivity | ASTM D257 | ≥ 1014Ω.cm |
| Longitudinal Change | ASTM D2671 | -10%～+10% |
| Flame Retardant | UL224,VW-1 | Pass |
| Heat Shock | ASTM D2671 | Pass |
| Cold Blend | ASTM D2671 | Pass |
| Water Absorption Ratio | ASTM D570 | <0.5% |
Hot Melting Adhesive Property
| Property | Test Method | Result |
| Water Absorption Ratio | ASTM D570 | <0.2% |
| Softening Point | ASTM E8 | 95℃ |
| Peeling Strength (PE) | ASTM D1000 | 120N/25m |
| Peeling Strength (AL) | ASTM D1000 | 80N/25m |
3. Specification Packaging
3:1 Ratio
| Size | Before Applied | After Applied(mm) | Package |
| Inch | mm
| Inner Diameter
(mm) | Inner Diameter
(mm) | Wall
Thickness | Adhesive
Thickness | M/Spool |
| Ø1/8 | Ø3.2 | 3.2 | 1.0 | 0.90±0.15 | 0.35±0.10 | 200 |
| Ø3/16 | Ø4.8 | 4.8 | 1.6 | 1.00±0.15 | 0.40±0.10 | 100 |
| Ø1/4 | Ø6.4 | 6.4 | 2.20 | 1.25±0.15 | 0.45±0.12 | 100 |
| Ø5/16 | Ø7.9 | 7.9 | 2.70 | 1.30±0.15 | 0.50±0.12 | 100 |
| Ø3/8 | Ø9.5 | 9.5 | 3.20 | 1.40±0.15 | 0.50±0.12 | 50 |
| Ø1/2 | Ø12.7 | 12.7 | 4.20 | 1.70±0.15 | 0.50±0.12 | 36.6 |
| Ø5/8 | Ø15.0 | 15 | 5.20 | 1.80±0.15 | 0.55±0.15 | 30.5 |
| Ø3/4 | Ø19.1 | 19.1 | 6.30 | 1.95±0.15 | 0.55±0.15 | 30.5 |
| Ø1 | Ø25.4 | 25.4 | 8.50 | 2.05±0.20 | 0.55±0.15 | 30.5 |
| Ø1-1/4 | Ø30.0 | 30 | 10.20 | 2.20±0.20 | 0.60±0.15 | 24.4 |
| Ø1-1/2 | Ø39.0 | 39 | 13.50 | 2.50±0.20 | 0.60±0.15 | 18.3 |
| Ø2 | Ø50.0 | 50 | 17.00 | 2.80±0.25 | 0.70±0.15 | 12.2 |
| Ø5/2 | Ø64 | 64 | 21.00 | 3.00±0.25 | 0.70±0.15 | 6.1 |
| Ø3 | Ø75 | 75 | 25.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø7/2 | Ø90 | 90 | 30.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø4 | Ø100 | 100 | 34.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø5 | Ø125 | 125 | 42.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
