PTFE Heat Shrink Tube , φ4-φ35mm , Material PTFE , Heat shrinkable
1. Product Introduction
Heat Shrink Teflon Tubing can be widely used in science
&technology field, such as chemistry, mechanical industries,
astronautic industry, vehicles, transformers, communications, etc
Features/Benefits of teflon heat shrink tube
·Shrink ratio: 1.25 : 1.
·Excellent flame-retardant performance.(oxygen index>95%)
·Good chemical,insulation and abrasion-resistance performance..
·Environment friendly
Operating Temperature Range of teflon heat shrink tube
Operating temperature range: -65℃~204℃
Minimum full recovery temperature: 210℃
2. Technical Parameter
| Property | standard | Test data |
| Tensile strength | ≥25MPa | ASTM D 2671 |
| elongation at break | ≥300% | ASTM D 2671 |
| Flammability | VW-1 | UL 224 |
| dielectric strength | ≥26kV/mm | IEC 60243 |
| volume resistivity | ≥1014Ω.cm | IEC 60093 |
| copper corrosion | Pass | UL 224 |
| water absorption | <0.1% | ASTM D 570 |
3. Specification Packaging
| Item No. | Inside diameter | After recovery | Standard length (m) |
| As supplied(min) | Wall thickness | Inside diameter(max) | Wall thickness |
| KS-FEP0070 | 7 | 0.15 | 5.7 | 0.25±0.03 | 1 |
| KS-FEP0115 | 11.5 | 0.3 | 9.3 | 0.37±0.05 | 1 |
| KS-FEP0145 | 14.5 | 0.3 | 11.7 | 0.37±0.05 | 1 |
| KS-FEP0190 | 19 | 0.3 | 15.3 | 0.37±0.05 | 1 |
| KS-FEP0240 | 24 | 0.4 | 19.3 | 0.5±0.1 | 1 |
| KS-FEP0280 | 28 | 0.4 | 22.5 | 0.5±0.1 | 1 |
| KS-FEP0350 | 35 | 0.4 | 28.1 | 0.5±0.1 | 1 |
| KS-FEP0440 | 44 | 0.4 | 36.1 | 0.5±0.1 | 1 |
| KS-FEP0540 | 54 | 0.4 | 43.3 | 0.5±0.1 | 1 |
| KS-FEP0660 | 66 | 0.4 | 52.9 | 0.5±0.1 | 1 |
| KS-FEP07801/41/4 1/4 | 78 | 0.4 | 62.5 | 0.5±0.1 | 1 |
| KS-FEP0900 | 90 | 0.4 | 72.1 | 0.5±0.1 | 1 |
| KS-FEP1030 | 103 | 0.4 | 82.5 | 0.5±0.1 | 1 |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
