Mastic heat shrinkable tubular sleeves for pipeline TS(M) ,
Material PE
1. Product Introduction
TS(M) series of mastic heat shrinkable tubular sleeves are consist
of a radiation cross-linked heat shrinkable backing coated on the
inside with a mastic adhesive. While the modified polyethylene
material of the backing offers superior mechanical protection, the
specially formulated adhesive offers excellent corrosion protection
under demanding conditions.It is easier to install as compared to
the wraparound design.
2. Technical Parameter
| Temperature Degree | TS(M)50 | TS(M)80 |
| Max Operating Temperature | 50℃ | 80℃ |
| Suitable Coating | PE,FBE,PP,STEEL | PE,FBE,PP,STEEL |
| Preheat Temperature to Steel | 60℃ | 85℃ |
| Rust Cleaning Degree | Sa2.5,St3.0 | Sa2.5,St3.0 |
| Property | Test Method | TS(M)50 | TS(M)80 |
| Backing |
| Tensile Strength (psi) | ASTM D638 | 2500 | 3000 |
| Elongation (%) | ASTM D638 | 500 | 550 |
| Dielectric (KV/mm) | ASTM D149 | 25 | 25 |
| Volume Resistance (Ω.cm) | ASTM D257 | 1.0x1016 | 1.0x1016 |
| Water Proof (%) (WT) | ASTM D570 | <0.1 | <0.1 |
| Adhesive |
| Softening Point(℃) | ASTM E28 | 78 | 120 |
| Lap Shear (N/cm2 )@23℃ | DIN EN12068 | 104 | 130 |
| Installed Product |
| Peel Strength (N/cm)@23℃ | DIN EN12068 | 50 | 50 |
| Impact Resistance(J) | DIN EN12068 | >15 | >15 |
| Cathodic Disbonding (mm rad) | DIN EN12068 | <12 | <12 |
| Resistance to thermal Aging | DIN EN12068 | 100d @50℃ | 100d @80℃ |
| Tensile Strength Ratio | DIN EN12068 | 0.9 | 0.9 |
| Elongation Ratio | DIN EN12068 | 0.9 | 0.8 |
Please contact us for more details.
3. Specification Packaging
| Pipe Size | Pipe OD | Sleeve OD |
| | |
| DN | Inch | (mm) | (mm) |
| 100 | 4 | 114 | 140 |
| 125 | 5 | 141 | 180 |
| 150 | 6 | 168 | 200 |
| 200 | 8 | 219 | 252 |
| 250 | 10 | 273 | 308 |
| 300 | 12 | 325 | 360 |
| 350 | 14 | 355 | 393 |
| 400 | 16 | 406 | 446 |
| 450 | 18 | 457 | 497 |
| 500 | 20 | 508 | 550 |
| 600 | 24 | 610 | 655 |
| 700 | 28 | 711 | 755 |
| 800 | 32 | 813 | 860 |
| 900 | 36 | 914 | 960 |
| 1000 | 40 | 1016 | 1066 |
Please contact us for other OD details.
4. Purchase Guide
Example: TS(M)50Φ219x500-1.2/1.0 (mm)
1, TS(M):Product code,measure unit:PC.
2, 50:Operating Temperature.
3, Φ219:Suitable steel OD,range: Φ50-2200mm.
4, 500:Sleeve width,range 50-720mm.
5, 1.2:Backing thickness,range:1.0-1.5mm.
6, 1.0:Adhesive thickness,range:0.8-2.0mm.
TS(M)50& TS(M)80 sleeves are suitable for a particular pipe size,if
the pipeline steel is coated a insulation layer such as 30mm
thickness,we need recalculate the pipeline OD and sleeve OD,e.g:
pipeline OD:219+(30x2)=279.
5. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
6. Application Case
