Cold shrink tubing with double strips CST D , Material Silicone
Rubber , EPDM , φ25-φ80mm
1. Product Introduction
CST(DS) series of silicon rubber cold shrink tube can be made from
silicon rubber or EPDM material,it have two draw strips for each
ends so that it can be install easily and positioned.It is very
suitable for low voltage cable straight joint than need install the
cold shrink tube exactly .The material with good weather
resistance,bacteria resistance and so on. Also it is approval by
Rohs.
2. Technical Parameter
| Property | Test Method | Silicon Rubber Result | EPDM Result |
| Tensile strength | ASTM D412 | 7MPa | 12MPa |
| Elongation | ASTM D412 | 670% | 680% |
| Tear strength | ASTMD751 | 34KN/m | 25KN/m |
| Dielectric strength | ASTM D149 | 25kv/mm | 25kv/mm |
| Shore A | ASTM D2240 | 42 | 50 |
3. Specification Packaging
| Size | Application Range (mm/inch) | Length after Relaxed (mm/inch) | Color |
| Φ25 | 6.3～21/0.25～0.59 | 90～180/3.5～7 | Black |
| Φ32 | 10～26/0.39～1.02 | 90～180/3.5～7 | Black |
| Φ35 | 12～30/0.47～1.18 | 90～180/3.5～7 | Black |
| Φ40 | 12.7～33/0.50～1.30 | 90～450/3.5～17.7 | Black |
| Φ44 | 12.7～38/0.50～1.50 | 90～450/3.5～17.7 | Black |
| Φ53 | 22～46/0.87～1.81 | 90～500/3.5～19.7 | Black |
| Ф65 | 32～58/1.26～2.28 | 90～500/3.5～19.7 | Black |
| Ф80 | 37～72/1.46～2.83 | 90～500/3.5～19.7 | Black |
The shrinkage ratio can be 5:1.
Other sizes,length&color can be customized.
4. Ordering Information
Packing
1By diffrent cartons and plastic pallents.
2.Anonymous packing is available.
3.OEM packing is available.
4.Do as customer's requirements.
Delivery
1.Our factory is nearby Shanghai.
2.Other seaport is acceptable.
3.Do as customer's requirements.
5. Application Case
