Pulse Valve Repair Kit 3 Inch Joil Type Black Nitrile Rubber
Diaphragm Model No.J76
The high quality diaphragms are reinforced and wear resistant to
guarantee a long operating life, even under harsh conditions.The
design with integral compression fittings will facilitate
installation because there is no need forthreaded piping.
The high flow, angle type bodies in combination with the special
main diaphragm assemblies give the unique operating features
required for pulse jet valves service applications.
If you need a large quantity, we can give a big discount for you.
Welcome your inquiry.Note: the Viton ( for high temperature
performance ) material is also available.
| Joil Diaphragm repair kits |
| Type | Quantity | Suitable valve | Material |
| 1" | 1 | JICI25, JICR25, JISI25, JISR25 | Nitril or Viton |
| 1 1/2" | 1 | JICI40, JICR40, JISI40, JISR40 |
| 1 1/2" | 2 | JICI40, JICR40, JISI40, JISR40 |
| 2" | 2 | JISI50, JISR50 |
| 2 1/2" | 2 | JISI65, JISR65 |
| 3'' | 2 | JISI80, JISR80, JIHI80, JIHR80
|
The other types also can be supplied
Application in Industrial Dust Collector Filtration
Definition:
Pulse valve diaphragm commonly used material is rubber. The rubber
diaphragm is mainly used in valves, regulating valves, automatic
mechanical follow-up devices, switches and counters of flow rate,
pressure, differential, liquid level, constant temperature and
volume thermal compensation, etc. Its advantages are high
reliability, good complexity, long working life and low cost.
Uniform elastic construction can be used in all kinds of rubber.
The rubber diaphragm has a long service life and can perform the
operation synchronously with other control components to ensure the
pulse compressed air injection. Even in extremely harsh working
conditions, it can guarantee its normal work and long service life.
The operating temperature and pressure range of the diaphragm
itself depends on the rubber, fabric and structure. The diaphragm
can work at -50~100 ° c and 0.4~ 0.8mpa. Fluoro rubber and silicone
rubber diaphragm can work at -80~232 ℃. Chlorol rubber diaphragm
can work under pressure of 0.4~ 0.8mpa, with good air tightness and
aging resistance.
Electromagnetic pulse valve diaphragm operation
Pulse valve diaphragm, is the electromagnetic pulse valve air
switch, electromagnetic pulse valve diaphragm back control pressure
gas quickly discharged. Diaphragm front control pressure gas will
lift the diaphragm, open the electromagnetic pulse valve channel
into the bit on the injection, the electrical signal disappears,
the electromagnetic pilot head of the spring make the moving column
immediately reset closed unloading hole. Electromagnetic pulse
valve diaphragm control gas pressure and diaphragm spring force
after close the channel, the electromagnetic pulse valve to stop
the resistance of injection on the diaphragm hole, when the guide
head moving column is raised, when gas pressure unloading,
electromagnetic pulse valve diaphragm have the effect of air
resistance, when unloading closed cavity, after pressure gas is
quickly to make the electromagnetic pulse valve diaphragm close the
channel, stop blowing.
If you want to know more,pls feel free to contact us
