A182 F316Ti Plate Flange Blank Flange Slip-on Threaded Flanges for
Welding EN1092-1
1. FLANGES ACCORDING TO DIN EN 1092-1
| Flanges according to DIN EN 1092-1 - PN2.5 |
| Flanges according to DIN EN 1092-1 - PN6 |
| Flanges according to DIN EN 1092-1 - PN10 |
| Flanges according to DIN EN 1092-1 - PN16 |
| Flanges according to DIN EN 1092-1 - PN25 |
| Flanges according to DIN EN 1092-1 - PN40 |
| Flanges according to DIN EN 1092-1 - PN63 |
| Flanges according to DIN EN 1092-1 - PN100 |
| Flanges according to DIN EN 1092-1 - PN160-PN400 |
| Flange facings according to DIN EN 1092-1 |
| Flange masses (weights) according to DIN EN 1092-1 |
| Flange type (typ) as in DIN EN 1092-1 |
| 01 (Plate [slip-on] flanges for welding) | 13 (Hubbed threaded flanges) |
| 02 (Loose plate flanges with weld-on plate collar) | 21 (Integral flanges) |
| 04 (Loose plate flanges with weld-neck collar) | 32 (Weld-on plate collars) |
| 05 (Blank [blind] flanges) | 33 (Lapped pipe ends) |
| 11 (Weld-neck flanges) | 34 (Weld-neck collars) |
| 12 (Hubbed slip-on flanges for welding) | 36 (Pressed collar with long neck) |
| 37 (Pressed collar) |
2. What is this standard about?
It specifies requirements for particular designations of circular
steel flange.
3. Who is this standard for?
· Mechanical engineers
· Process engineers
· Design engineers
· Architects
· Building services companies
· Health and safety consultants
· Fire safety consultants
· Insurance companies
· Gas and liquid distribution companies
· Electrical power companies
· Electric equipment manufacturers
· Inspectors and quality assessors
· Companies or individuals responsible for the design,
manufacturing, installation and commissioning of pipework
3. Some Flange feature equivalents: DIN EN 1092 from DIN
| Some Flange feature equivalents: DIN EN 1092 from DIN |
| DIN EN 1092-1 | DIN |
| DIN EN 1092-1 Type B Raised Face | DIN 2526 Form C |
| DIN EN 1092-1 Type C Tongue | DIN 2512 Feder (Form F) |
| DIN EN 1092-1 Type D Groove | DIN 2512 Nut (Form N) |
| DIN EN 1092-1 Type E Spigot | DIN 2513 Vorsprung (Form V) |
| DIN EN 1092-1 Type F Recess | DIN 2513 Rücksprung (Form R) |
ASTM A182 F316Ti WN Flange
4. Mechanical Properties of ASTM A182 SS 316Ti Plate Flanges
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
5. Chemical Composition of Grade F316Ti Stainless Steel Pipe
Flanges
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316Ti | 0.8 max | 2.0 max | 0.75 max | 0.045 max | 0.030 max | 16.00 - 18.00 | 2.00 - 3.00 | 10.00 - 14.00 | 68.395 min |
6. ASME SA182 316Ti Stainless Steel Flanges Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
7. Grades of stainless:
We shall be pleased to develop Non-Standard
- ASTM A403 WP316/316L
- ASTM A403 WP304/304L
- ASTM A182 F304, F304L, F316, F316L, F321
8. Forged stainless steel flange dimensions conform to ASME B16.5
.NPT Threads conform to ASME B1.20.1
.Up to 12" Listed - Contact us for pricing on larger sizes 304/304L
& 316/316L Stainless Steel Listed
.Stainless steel Welding neck flanges according to DIN 2632 ND 10
.Slip-on Flanges according to DIN 2576 ND 10
.S.S. Stainless steel 304 316 L flanges
.Lap joint flanges according to DIN 2642 ND 10
.S.S. Blind flange according to DIN 2527/E ND 64
.S.S. Threaded flanges according to DIN 2566 ND 10/16
.Slip-on flanges according to ASTM-A 182 SO/RF 150 lbs
.S.S. Welding neck flange according to ASTM-A 182 WN/RF 150 lbs
.Stainless Steel Threaded flange according to ASTM-A 182 TR/RF 150
lbs
