7inch 40T wood cutting saw blade for Wood Laminate Board MDF
Cutting
Raw Material
a Tungsten Carbide tip from Ceratizit, Luxemburg,
KCR02+/05+/06,HRA95
b High tensile strength and strong corrosion resistance Cutting
process is easy and the cutting life is long.
c Welding strips; BUMICORE brazetec, Automate brazing with a
special silver - copper - silver compound yields
d Sawtooth sharp, no chipping, more efficient cutting Cutting edge
is not burr
e Noise reduction: super silent line, much more smooth
Advantages
a. 20 years experience, completed pre-sales and after-sales
services
b. High precision grinding technology controlled within 0.06
-0.08mm tolerance
c. Very low cutting pressure and small power consumption thanks to
optimized cutting geometry
d. Excellent cutting quality in wood-based materials containing
fibers
e. High precision grinding technology controlled within 0.06
-0.08mm tolerance
Application
a Suitable for wood cutting of solid wood, wooden T doors, plywood,
mahogany,
wood and other wood for long-lasting cutting.
b Machine avaialbe;Table saws, double end cutting saw machines and
cross cutting saw machines
Specification
| High precision solid wood crossing cutting disc |
| Diameter(mm) | Kerf Width (B) (mm) | Arbor Diameter (d) (mm) | Number Teeth (Z) | Tooth Type |
| 255 | 3.0 | 25.4 | 100 | G3/G5 |
| 255 | 3.0 | 30 | 100 | G3/G5 |
| 255 | 3.0 | 30 | 120 | G3/G5 |
| 255 | 3.0 | 30 | 120 | G3/G5 |
| 305 | 3.0 | 25.4 | 100 | G3/G5 |
| 305 | 3.0 | 30 | 100 | G3/G5 |
| 305 | 3.0 | 30 | 120 | G3/G5 |
| 305 | 3.0 | 30 | 100 | G3/G5 |
| 305 | 3.2 | 30 | 120 | G3/G5 |
| Double end milling saws |
| 255 | 4.0 | 50 | 80 | R/L/Flat |
| 255 | 4.0 | 50 | 100 | R/L/Flat |
