Huawei SMARTAX MA5608T OLT 8port 16 port and 32port with C++ module
Product Description
The MA5608T Mini OLT is designed to address Fiber to the premise
(FTTP) or deep fiber deployment scenarios where a large OLT
chassis may not be the best fit for a variety of reasons. Huawei’s
mini OLT MA5608T is designed to be the perfect complement to
the other MA5600 series larger OLTs and offers the same carrier
grade features and performance.
MA5608T’s compact and front access design make it an ideal solution
for deployments in locations such as space-constrained huts,
outdoor cabinets or building basements. It has AC and DC powering
options,extended temperature range, and offers easy installation.
Designed to support ever-increasing bandwidth demand, MA5608T has
200 Gbps backplane. The combination of the high-capacity
and line interfaces with best-in-class performance allows the
operators to deliver a range of services for maximum revenue at
highly
competitive cost points.
The MA5608T shares the same product architecture with the MA5600
series OLTs to allow seamless network growth.
Highlights
Convergence and access integration
* Provides super large convergence switching capacity.
Specifically, an MA5600T series device supports 3.2 Tbit/s
backplane
capacity, 1920 Gbit/s switching capacity, and 512,000 MAC
addresses.
* Provides super high-density cascading capability. Specifically,
an MA5600T series device supports a maximum of 46 X 10GE
or 768 GE services, with no additional convergence switches.
High reliability
*Provides highly reliable networking capabilities and ensures
dual-OLT hot backup, remote disaster tolerance, and service
upgrades without interruption.
* Provides comprehensive Quality of Service
(QoS) functions and supports traffic classification management,
priority control,
and bandwidth control. The Hierarchical-Quality of Service (H-QoS)
function meets various Service Level Agreement (SLA)
requirements of commercial customers.
*Provides an End-to-End (E2E) highly reliable design, enabling
Bidirectional Forwarding Detection (BFD), Smart Link, Link
Aggregation Control Protocol (LACP) redundancy protection and GPON
type B/type C line protection in the upstream direction.
Multi-scenario access
* Supports access of multiple E1 private line services, and Native
Time-Division Multiplexing (TDM) or Circuit Emulation Services
over Packet (CESoP)/Structure-Agnostic TDM over Packet (SAToP)
function.
* Supports the Emulated Local Area Network (ELAN) function and
Virtual Local Area Network (VLAN)-based internal traffic
exchange, satisfying enterprise and community network application
requirements.
* Supports non-convergence access of Internet Protocol television
(IPTV) users. One subrack supports 8000 multicast users and
4,000 multicast channels.
Smooth evolution
* Supports GPON, 10G Passive Optical Network (PON), and 40G PON on
a platform, enabling smooth evolution and achieving
ultra-bandwidth access.
* Supports IPv4/IPv6 dual stacks and IPv6 multicast, enabling
smooth evolution from IPv4 to IPv6.
Energy saving
* Uses special chips for conserving power. Specifically, 16 ports
on a GPON board consume less than 73 W of power.
* Supports idle board automatic power-off and intelligent fan speed
adjustment, effectively lowering idle board power
consumption.
Key Features
System Performance
* 3.2T bit/s backplane capacity, 960G bit/s switch capacity
512K MAC addresses
* Line speed L2/L3 switching
* Static route/RIP/OSPF/MPLS
* TDM private line service with Native TDM or CESoP
* BITS/E1/STM-1/Ethernet Synchronization/IEEE
1588v2/1PPS+ToD
GPON Line Card
* 8/16 port per card with pluggable SFP optical
module(Class B+ or Class C+ are optional)
* Up to 1:128 splitting ratio
* Bidirectional FEC
* ONU-based and queue-based traffic shaping
* Rogue ONT detection and isolation
* Type B / Type C protection and Type C dual-homing
* Optical power meter (can support +-1dB precision)
* eOTDR (1:8 splitting ratio)
10G GPON Line Card
* 4 port per card with pluggable XFP optical module
* Up to 1:128 splitting ratio (N1)
* Bidirectional FEC
* Rogue ONT detection and isolation
* Type B / Type C protection and Type C dual-homing
* Coexist with GPON
Ethernet P2P Line Card
* 48 port per card with CSFP optical module, 768 ports per shelf
* Port-based and queue-based traffic shaping
* Single fiber double direction access, 100Mbit/s or
1000Mbit/s per port
* DHCP Option 82 relay agent and PPPoE relay agent
* Ethernet OAM
* Ethernet synchronization
Specifications
| Dimensions (H X W XD) | 88 mm X 442 mm X 233.5 mm |
| Operating Environment | -40°C to +65°C
5% RH to 95% RH |
| Power | -48V DC power input
Dual-power supply protection
Operating voltage range of -38.4V to -72V
Switching Capacity --Backplane Bus |
| Switching Capacity -- Backplane Bus | 720 Gbit/s |
| Switching Capacity -- Control Board | 512 Gbit/s |
| Access Capacity | 8 X 10G GPON
32 XGPON
96 X GE |
| Port Type | - Upstream ports: 10 GE optical and GE optical/electrical ports
- Service ports: GPON optical port, P2P FE optical port, P2P GE
optical port, and Ethernet optical port
|
| System Performance | - Layer 2/Layer 3 line-rate forwarding
- Static route, RIP, OSPF, and MPLS
- Clock synchronization schemes: BITS, E1, STM-1, Ethernet clock
synchronization, 1588v2, and 1PPS + ToD
- Maximum split ratio of 1:256
- Maximum logical distance between devices: 60 km
|
Product Pictures
Wangtong Factory
Company Profile
