Large Span Prefabricated Construction Design Steel Structure
Logistics Warehouse
Project description:
Large Span Prefabricated Construction Design Steel Structure
Logistics Warehouse. This steel structure logistics warehouse were
designed, fabricated and installed by Ruly Steel. It is used as a
logistics warehouse for an airport. The span is very large to
provide large space for store and transport indoor. It also has
very large steel canopy.We fabricate the steel beam& column, roof &
wall sandwich panel, purlin, canopy and provide all the accessory
for this project.Although the density of steel is larger than that
of other building materials, its strength is very high. Under the
same force, the steel structure has a small weight and can be made
into a structure with a large span.
Material list:
| Steel Frame | H section steel | Q235/Q345 steel 8mm/10mm |
| Welding | Automatic submerged arc welding |
| Rust removal | Sand blasting |
| Surface finish | Alkyd paint or galvanized |
| Intensive bolt | M20,Grade 10.9 |
| Supporting System | Angle brace | L50x4,Steel Q235, processed and painted |
| Horizontal brace | Φ20, Steel Q235, processed and painted |
| Column brance | Φ20, Steel Q235, processed and painted |
| Tie rod | Φ89*3, Steel Q235, processed and painted |
| Ordinary bolt | M12 Galvanized bolt |
| Roof | Purlin | C160*60*2.5,Steel Q235, galvanized and painted |
| Roof panel | Sandwich panel or corrugated steel sheet |
| Sky light | 6mm thick PVC |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Gutter | 0.4mm thick sheet steel profile or galvanized sheet |
| Down pie | Φ110PVC |
| Walls | Purlin | C160*60*2.5,Steel Q235, painted |
| Wall | Sandwich panel or corrugated steel plate |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Ventilation | Ventilation ball |
| Doors & windows | Rolling door/sliding door PVC/alu/steel/window |
Designing:
We design the preliminary layout plan, shop drawing, 3D Tekla
Model, Construction drawing for such project.We have a dedicated
steel structure engineering design department and research and
development department, and established an independent and complete
steel structure engineering design, optimization and deepening
design system. Establishing engineering materials than building
materials, we not only control the reliability and economy of the
structure, but also the categories, performance, selection and
combination of traditional enclosing materials and new maintenance
materials. Our design is not only more applicable, safer, more
economical, but also rich in architectural beauty.
Packing And Loading:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ.
The following questions we need to know before making the price if
you need us to design.
Just feel free to fill the form based on what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be
suggested; . if not, the metal steel sheets will be ok. The cost of
the latter will be much
lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting
height _____m |
