MTP to MTP Female OS2 LSZH Type A 12 Fibre Single Mode Trunk Cable
Yellow Fiber Optic Patch Cable
12F MTP(Female)- MTP(Female) 3.0mm LSZH Patch cable/trunk cable. MTP Fiber Patch cable/trunk cable is terminated with MTP connector
on both ends. MTP Patch cable/trunk cables connect MTP modules
together as a permanent link. The Patch cable/trunk cables are
available with 12, 24, 48,60,72 ,96,144fibers. Support speeds up to
10/40/100Gbps data center solutions. They are typically adopted to
interconnect cassettes, panels or ruggedized MTP fan-outs, and to
facilitate rapid deployment of high-density backbone cabling in
data centers and other high fiber environments. Besides, MTP also
provides much flexibility and convenience once you have to change
the connector style in the patch panels. Instead of changing the
connector on the cable trunk, just installing a new cassette with
the new connector style on the cross-connect side of the patch
panel.
The merits of MTP/MPO Patch cable/trunk cable generally include
High quality—MTP/MTP Patch cable/trunk cables are factory
pre-terminated, tested and packaged along with the test reports.
These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very
small diameters, which decrease the cable volume and improve the
air-conditioning conditions in data centers.
Time saving—With the special plug and play design, MTP/MPO Patch
cable/trunk cables can be incorporated and immediately plugged in.
It greatly helps reduce the installation time.
All of OMC’s MTP Connectors are from USconec. MTP Patch cable/trunk
cable is a kind of high-density cable assemblies which is generally
use in three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
MTP Patch Cord’s Specification
| MPO/MTP’s spec items. | Single mode (UPC Flat polish, APC 8 degree polish) | Multimode (PC Flat polish) |
| Insertion loss | Standard loss≤0.7dB;Low loss≤0.35dB | Standard loss≤0.5dB;Low loss≤0.35dB |
| Return loss | ≥55dB | ≥35dB |
| Durability | <0.3dBtypical change, 200 matings |
| Interchangeability | ≤0.2dB |
| Tensile strength | >70N |
| Operating Temperature | -40 to + 85°C
|
Features:
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector
terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options
available
Color coded housings available to differentiate fiber type, polish
type and/or connector grade
Good in repeatability and exchangeability
Description:
MTP Female to MTP Female OS2 9/125 Single Mode Trunk Cable
High Quality MPO Cable Guarantee
1. High-performance polishing machine, and complemented by
precision plates holders designed for MT ferrules.
2. 3D interferometer provides verification of MTP/MPO polishing
process, and making all parameters of the polished MT ferrule
complies and exceeds industry standards.
3. The flexibility of the tester provides the complete spectrum of
optical testing required for complex and high fiber count cable
assemblies.
MPO Connector Types
MPO Male with Pins MPO Female without Pins
Two other clearly visible features are the noses and guide grooves
(keys) on the top side
(Note: Female connector need to connect with male connector type.)
Packaging & Delivery:
Packaging Details
1. Fumigation of wood drum, plywooden drum or wooden drum
2. carton box
3. customized
Port: Shenzhen
Application:
1. CATV
2. Active dvice termination
3. Telecommunication networks
4. Metro
5. Local Area Networks(LANs)
6. Data Processing networks
7. Test Equipment
Packaging
This easily taken and well-protected fiber patch cable package has
been labelled and marked by OMC as default .Standard carton size :
34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used
depends on goods Qty . Packing can be customized.
1. self-seal PE bag 2. Bubble bag 3. Paper carton 4 .fumig-free
Pallet
Company Information:
OMC industry co., limited, which was founded by an expert team, has
been exporting FTTX passive products since 2007. We focus on
providing innovative and integrated FTTX solutions for a variety of
applications/Networks. Our capabilities include product/solution
design, development, enhancement and integration. Our products are
among the highest performing in the industry and truly represent
the best values in the industry. We also offer training, pre and
post-sales support. We help you select the right products for your
Optical network's needs.
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
