To figure custom CNC diamond cutting tool PCD turning diamond lathe
tools turning tools 
overview
[Tool selection] reasonable selection of tools and maintenance, to
facilitate the use of tools to play the efficiency, conducive to
the use of tools and time, cost control, JOEBEN tools have the
following Suggestions:
1, according to the structure of the processed products, materials
and processing hardness to choose the appropriate tool type.
2. Check the power and stiffness of the machine so that the
required tool diameter can be used on the machine.
3. The overhang of the cutter on the spindle should be as short as
possible to reduce the impact of the cutter axis and the workpiece
position on the impact load.
4, the use of suitable for the process of tool pitch, so that there
is not too much blade and workpiece mesh and vibration, on the
other hand, in the milling of narrow workpiece or milling cavity to
keep the blade and workpiece mesh.
5, try to use the feed per blade, in order to get the cutting
position when the chip thickness, so as to reduce tool wear.The
indexable blade with front Angle groove is used to obtain stable
cutting power.
6, choose suitable for the width of the workpiece tool diameter.
7, choose the appropriate main Angle.
8. Place each tool in a regular and orderly manner.
9, follow the rules of tool maintenance and repair, and monitor
tool wear.
| PCD Recommended Cutting Condition |
| Work piece | Cutting Speed | Depth of Cut | Feed Rate |
| (m/min) | (mm) | (mm/rev) |
| Aluminum(5~8% SI ) | 350~1600 | 0.05~2.50 | 0.10~0.40 |
| Aluminum(8~12% SI ) | 350~1300 | 0.05~2.50 | 0.10~0.40 |
| Aluminum(14~18% SI ) | 160~800 | 0.05~2.50 | 0.05~0.25 |
| Copper | 350~1000 | 0.15~2.50 | 0.05~0.20 |
| Sintered Carbid | 15~25 | 0.05~0.60 | 0.10~0.20 |
| Glass Fiber | 100~800 | 0.15~0.50 | 0.03~0.25 |
| Carbon | 160~700 | 0.15~2.50 | 0.15~0.40 |
| High Aluminum | 70~250 | 0.05~1.50 | 0.03~0.15 |
| Ceramics |
| Wood | 1000-2500 | 0.2~5.0 | 010~0.50 |
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these
field over 10 years, we are very familiar Chinese market tools. we
usually help our customer choose the best suitable related tools
for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need
about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory
price and fast delivery.
Our advantage:
- 1. 10 years experience in carbide roll and cutting tool
manufacturing
- 2. From row material to tool produdtion.
- 3. World top level prodution equipment and rich experience team
ATTACTION:
- 1.Make sure work piece and machine are stable and use a precision
holder.
- 2.Please adjust the speed,feed and cutting depth according to
actual cutting conditions.
- 3.The milling conditions are for an end mill where the tool
overhang length is less than 4*D(mill diameter). When the tool
overhang length is longer, please adjust the speed,feed and cutting
depth.
