HJF140 ton servo injection molding machine
- Imported advanced computer systems, Chinese / English interface.
- Can save 50 sets of mold parameters.
- Advanced clamping structure and injection parts, precision
hydraulic system and circuit design.
- Suitable for producing different types of precision small parts.
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of
movements, so as ensure the smooth movement.
- Quality:12 month Quality guarantee ,Free spare parts
replacement,(NOT include man-made sabotage)
- Service:We provide free advanced training and maintenance in china
factory,and 24 hours on-line or phone service if you request we also can provide installation and training abroad,until customer's satisfaction
- Delivery time:35days after advance payment
Adjustment Unit
Automatic Mold Height Adjustment Saves the time and cost during the
mold changing.
Clamping Unit
The plates were designed using FEM software, ensuring a stable and
rigid clamping system. Five point inward moving double toggle
system ensures high rigidity and precision for mold clamping and
also reducing stress and Strain effects.
Hydraulic Unit
The hydraulic system using the world famous pump and control valve
can control the machine running precisely, ensuring the precision,
reliability and durability of whole machine.
Injection Unit
Dual-pillar supporting and dual-cylinder injection balance devices
ensure the stress on screw balanced during injection.
Specific screw and barrel designs are available for processing
different material requirements.
| SPECIFICATION | HJF140 |
| Screw Type | A | B | C |
| Screw Diameter | Mm | 38 | 42 | 45 |
| Screw L/D Ration | L/D | 22.1 | 21.6 | 19.5 |
| Shot Size(Theoretical) | cm3 | 215 | 263 | 302 |
| Injection Weight(PS) | g | 193 | 236 | 271 |
| Injection Rate | g/s | 94 | 105 | 135 |
| Injection Pressure | MPa | 205 | 159 | 140 |
| Screw Speed | rpm | 0~220 |
| Clamping Force | KN | 1400 |
| Opening stroke | mm | 380 |
| Space Between Tie Bars | mm | 420*420 |
| Max.Mold Height | mm | 450 |
| Min.Mold Height | mm | 170 |
| Ejector Stroke | mm | 120 |
| Ejector Tonnage | KN | 33 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 13 |
| Heater power | KW | 7.2 |
| Machine Dimension(L*W*H) | M | 4.5*1.2*1.7 |
| Machine weight | T | 4.2 |
| Oil Tank Capacity | L | 230 |
Haijiang Machinery Main configuration
Standard machinery
| PLC | PORCHESON (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | LS (KOREA) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
