AC 230V Rated Voltage HHO Engine Carbon Cleaning Machine Engine
Cleaning Products
Why do turbos get dirty ?
Compressed air is one of the principal aspects of a working engine.
The turbocharger is a turbine-driven forced induction device that
increases an engine’s efficiency and power by forcing extra air
into the combustion chamber. This improvement results because the
turbine can force more air, and proportionately more fuel, into the
combustion chamber than atmospheric pressure alone. The power
needed to spin the centrifugal compressor is derived from the
kinetic energy of the engine’s exhaust gases, without consuming any
power from the drive shaft.
Poor fuel atomization leads to the generation of soot, which can
clog up the exhaust system. This puts negative pressure on the
turbocharger, which inhibits the exhaust and reduces engine power.
In addition to a less powerful engine, the main symptoms of this
predicament are faulty engine starts, a noisy turbo, white exhaust
smoke, and the over-consumption of oil.
How to preserve the life of the turbocharger ?
The turbocharger is lubricated by oil from the engine. Therefore,
as is the case with other mechanical components, it is in the best
interest of the owner to adhere to the manufacturer’s
recommendations regarding oil change intervals as well as the grade
of oil to use. Smooth driving from a cold start is recommended, as
long as the engine and engine oil temperature rise. Also important
to note: when the engine is shut off, although the oil is no longer
flowing, the turbocharger will continue to turn for a short period
of time. To prevent the turbo from turning dry, it is recommended
to let the engine run for a while after coming to a final stop.
Specification:
| Item | Engine carbon cleaning machine |
| Color | Blue |
| Main function | Carbon clean |
| Rated voltage | AC 220V |
| Rated power | <6 KW |
| Gas output | 1500L/h |
| Water consumption | 0.7L/h |
| OEM | Available |
Description:
HHO carbon cleaner can completely remove the carbon deposits in the
engine and it only takes 20 minutes. After that, the car owner will
found that the engine problems disappeared gradually. The engine
noise reduced, exhaust emission with harmful substance lower down,
engine power increased 20%. There maybe not visible effect like
other chemical drip engine carbon cleaning machine through exhaust
pipeline, but it is effective in the driving performance.
FAQs:
1. Can I use ordinary tap water?
---No, you should only use distilled or deionised water, never tap
water or mineral water which could fur up the plates and reduce
output.
2. Do I need electrolyte and where can I buy it?
---We use potassium hydroxide flake. A starter amount is provided,
more can be bought in HDPE tubs from chemical suppliers on eBay.
3. Besides supplying HHO to the air intake, is there anything else
I should do when carbon cleaning?
---Ensure the engine is warm before you start, dab the throttle to
rev the engine every few minutes to help carry the loosened
particles out.
4. If it HHO burns to produce water wont that harm my engine?
---No because the temperatures are too high to allow condensation
of the vapour and water vapour is a normal product of combustion
anyway, so engines are designed to handle it. It passes out safely
as high temperature steam.
5. Do you provide an operating manual?
---Yes, these are forwarded to our customers as PDF files.
6. Can you supply the units unbranded so I can add my own logo?
---Yes just specify the LOGO, we can print on machine .
