1000w High Power 20Khz Ultrasonic Rubber Cutter Assembled for CNC
Cutting System
Description:
The rubber ultrasonic cutting machine is a type of equipment that
uses ultrasonic energy for cutting processing. The rubber
ultrasonic cutting machine is a special application of the
ultrasonic cutting machine. It is a kind of equipment that uses
ultrasonic energy to cut and process. Its biggest feature is that
the cutting does not use the cutting edge. Or, without the
traditional edge
The rubber ultrasonic cutting machine melts the localized heat of
the material to be cut by the energy of the ultrasonic wave,
thereby achieving the purpose of cutting the material. Therefore,
the ultrasonic cutting does not require a sharp cutting edge, nor
does it require a large pressure, and does not cause chipping or
breakage of the material to be cut. At the same time, since the
cutting blade is subjected to ultrasonic vibration, the frictional
resistance is particularly small, and the material to be cut is not
easily adhered to the blade. This is especially effective for
viscous and elastic materials, frozen materials such as foods,
rubber materials, and inconvenient objects. Ultrasonic cutting also
has a great advantage, that is, it has a fusion of the cutting part
while cutting, and the cutting part is sealed, which does not cause
the textile material to flash. The ultrasonic cutter cutter
directly loads the ultrasonic energy onto the cutter, and the
cutter becomes a cutter with ultrasonic waves. When cutting
materials, the material is mainly softened and melted by ultrasonic
energy. The cutting edge of the cutter only functions as slit
positioning, ultrasonic energy output, and separation material.
This cutting method is suitable for cutting thick, thick, long,
etc. materials that are inconvenient to set the cutting board. Such
as raw rubber output from the rubber mixer, pipe cutting, frozen
meat, candy, chocolate cutting, cake cutting, printed circuit
boards, etc.
Specifications:
| Item No | QR-CR20Y |
| Power | 1000W |
| Generator | Digital generator |
| Frequency | 20KHZ |
| Voltage | 220V or 110V |
| Cutter Weight | 2kgs |
| Gross weight | 13Kg |
Comparison between Traditional Cutter and Ultrasonic Cutter:
| Traditional Cutter | Ultrasonic Cutter |
| A sharp-edged tool that presses against the material being cut. | The ultrasonic energy is concentratedly input to the cutting
portion of the material to be cut. |
| The pressure is concentrated at the cutting edge, the pressure is
very large, exceeding the shear strength of the material being cut,
and the molecular bonding of the material is pulled apart and cut. | Under the action of huge ultrasonic energy, this part softens and
melts instantly, and the strength is greatly reduced. The purpose
of cutting the material can be achieved with a small amount of
force |
| The cutting tool has a sharp edge and the material itself is
subject to relatively high pressure. | High stability, environmental protection and no pollution |
| It is not good for soft and elastic materials, and it is more
difficult for viscous materials. | The biggest feature is that there is no traditional cutting edge. |
Application:
Tire crown; nylon; steel strip plastic layer; nylon cord; inner
lining; sidewall; apex; triangle ring, etc.; printed circuit board;
natural fiber; synthetic fiber; non-woven fabric; thin synthetic
resin; All forms of paper; base film; food (cake, sugar, meat).
1000w High Power 20Khz Ultrasonic Rubber Cutter Assembled for CNC
Cutting System
