- FX1S-30MR-001
- FX1S-30MT-001
- FX1S-20MR-001
- FX1S-20MT-001
- FX1S-14MR-001
- FX1S-14MT-001
- FX1S-10MR-001
- FX1S-10MT-001
A simple introduction
The FX1S series PLC incorporates all the best features into a small
controller.
FX1S is suitable for minimal packaging, provides up to 30 I/O, and
can transmit data through serial communication, so it can be used
where compact PLCS cannot be used.
Positioning and pulse output functions
The FX1S PLC unit can simultaneously output 2 point 100KHz pulses
and is equipped with 7 special positioning instructions, including
zero return, absolute position readout, absolute or relative
address expression and special pulse output control.
Built-in 24V dc power supply
24V, 400mA dc power supply can be used for peripheral equipment,
such as sensors or other components.
Clock function and hour table function
There are real-time clock standards in all FX1sPLC.Time setting and
comparison instructions are easy to operate.The hour table function
provides valuable information for process tracking and machine
maintenance.
Continuous scanning function
Define the operation cycle for the duration of the scan required by
the application.
Input filter adjustment function
Input signals (x000 to x017 in basic units) can be flattened with
an input filter.
Element annotation recording function
Element annotations can be recorded in program registers.
Online program editing
Changing the program online won't cost you hours or shut down
production.
The RUN/STOP switch
The run/stop switch on the panel is easy to operate.
Remote maintenance
Remote programming software can monitor, upload, or unload programs
and data through modem communication
Password protection
Use an eight-digit password to protect your program.
