Waterborne Drying Agent DR001
Introduction: The new type drying agent used in water - based coating. It can be
used as the main drying agent, with good quick drying and increase
the hardness of film dry growth, good addition, after the addition
will not cause paint anti coarse phenomenon. It is suitable for
water-borne epoxy ester, water-borne alkyd, etc.
Product data:
| Project | DR001 |
| Appearance | Brownish red transparent liquid |
| Cobalt content | 1.2% |
| Nonvolatile component | 15% |
| pH | 7-8 |
| Solvent | PM,ethanol |
Drying agent characteristics:
- Let the paint system dry quickly
- Can be used in many systems, such as water-borne epoxy ester,
water-borne alkyd, etc
- Can be used in varnish and painted
Method of use:
Add 0.5-5% of the solid resin. It is important to determine the
appropriate amount of paint in the formulation.If the amount of
insufficient will affect the film drying speed and hardness.
However,
excessive use can also affect the appearance of the film. the
appropriate amount of addition should be determined through actual
experiments.
Storage:
Under the condition of product in a cool, dry storage, suggested
below 40 ℃ storage use. Please close the bottle cap after use to
keep the product active and prevent excessive volatile solvent.
Safety and precautions
It is recommended to wear the laboratory safety protection before
operation. In case of accidental splash on eyes, clothes or skin,
rinse immediately with plenty of water and seek medical advice
immediately.
Reference: The manual is a general introduction of our products. It will be
adjusted as the quality of our products improves.
Please contact us for the latest product technology.
