Cylinder Heads And Engine Blocks Ultrasonic Cleaners
Automotive Ultrasonic Cleaners is primarily an aqueous tank
systemthat uses ultrasonic energy to remove dirt, grease, oiland
baked-on carbon from parts. Contaminants such aspaint, rust,
glued-on gaskets, and heavy layers of bake don carbon can also be
removed by ultrasonic cleaning but require more aggressive
chemistries. Unlike someother cleaning processes, ultrasonic
cleaning will notdamage intricate, lightweight, or easily damaged
parts.
Our Ultrasonic cleaning process, can effectively clean the following components- Cylinder Heads And Engine Blocks And Aircraft Parts ,Aluminum castings,
engine blocks, Carburetors, Cylinder Heads, Engines, Engine
Components, Gear Boxes, Filters, Tubes and Valves.
AG Cylinder Heads And Engine Blocks ultrasonic cleaning machine are
revolutionizing cleaning methods and processes on the Valve Plates
, our Valve Plates And Aircraft Parts ultrasonic cleaning machine
can clean all kinds of automotive, aircraft, and marine engine
parts, ultrasonic technology for cleaning parts eliminates manual
labor while providing you with superior cleaning action, most parts
can be cleaned with environmentally friendly water-based solutions
Ultrasonic Cleaning - FAQ
What is the foil test?
Ensure that the tank is at the required operating temperature, has
been degassed, and filled with the correct amount of fluid and
cleaning solution.Then, using a piece of aluminium foil,suspend the
foil in the tank. Turn on the ultrasonics and leave for approx ten
minutes.
Remove the foil and inspect. If cavitation is occurring the foil
should be perforated and wrinkled. Try this in different places in
the tank to ensure cavitation is all over.
Foil following cavitation
Why is fluid temperature important?
Heat not only aids the degassing process, but it also enhances and
speeds up the actual cleaning process.Additionally most detergents
are designed to work best at elevated temperature.
Which cleaning solution should I use?
Technowash ltd has a large range of aqueous based detergents
specifically designed for use with ultrasonic cleaning. Please
contact us for more details.
How often should I change the cleaning solution?
Cleaning solution should be changed if there is a noticeable
difference in cleaning results, or when the solution is visibly
dirty.
What is the recommended cycle time?
Process times vary depending on the application and the level of
contaminant. All Technowash ltd machines are supplied with fully
adjustable process cycle timers.
