V50 2 inch Full Bullnose Diamond Hand Profile Wheel for Countertop
Edge
Description:
With Hand Profilers, an operator with little or no fabrication
skills can easily create a perfect edge profile of Ogee, Bullnose,
Bevel or Roundovers. The Profilers may be used on the materials as
follows: Granite, Engineered Stone, Porcelain, Marble and
Limestone. Can be used on concrete also, but life will be short due
to the abrasive nature of concrete.
Profilers can be used on any polishers or grinders with 5/8"-11
threaded spindles. A center water-feed polisher with 3500 RPM is
recommended for the application. Optimal speed 3,500- 4,000 RPM.
Adopting the latest “Vacuum Brazed Technology”, our profilers give
you aggressive grinding action and longevity, without losing the
shape of the profile, unlike the Sintered profilers on the market.
Features:
1. For 50mm(2") thick full bullnose edge;
2. Fits on polishers/ grinders with 5/8"-11 thread spindle;
3. The nylon guide assure the profiled edge remains straight;
4. Utilizing vacuum brazed diamond technology;
5. Wet or dry application, optimal speed 3,500- 4,000 RPM.
Specification:
| Product name | V50 2 inch Full Bullnose Diamond Hand Profile Wheel for Countertop
Edge |
| Diameter | 65mm,75mm,85mm,95mm |
| Diamond width | 5mm, 10mm, 15mm,20mm,30mm,40mm,50mm |
| Diamond grit | 30/40#, 40/50#, 50/60# |
| Connection | M14 or 5/8"-11 thread |
| Usage | For shaping profiling granite, marble and other stones edges |
| Shape | Shape V,full bullnose |
| Special application and design are available upon request |
Stone Models:
