Professional Transformer Roll Forming Production Line 100 L / Min
Air Consumption
Raw material material SPCC, ST12, ST13, ST14 cold rolled sheet
Wing width 300-1300mm
Wing height 50-390mm
The number of wave fin stiffener slots is up to 2 (according to
user needs)
Wing fin pitch 45 ≤ mm
Corrugated sheet thickness 1.0-1.75mm
Wing fin pitch error ± 0.25mm
Molding and welding speed 3~4 waves/min
Wave fin lumen gap 6mm
The total power of the equipment is about 45kW (including two
welding machines)
The total weight of the equipment is about 20T
Gas source pressure 0.8Mpa
Air consumption 100L/min
After sales service
◆ Provide professional training to customers and provide technical
information on product use, maintenance and maintenance.
◆ Complete the product liability specified in the product technical
specifications specified in the contract to fully meet the needs of
users.
◆ According to customer requirements, professional technicians can
be sent to on-site technical service.
◆ On-site installation of tendering equipment, commissioning,
maintenance, training of buyer personnel
Composition
1. Transformer corrugated sheet forming machine
Requirements: Both the movable forming plate and the fixed forming
plate have two quenching strips for pressing the ends of the
corrugated sheet. The position of the bead can be adjusted
according to the width of the steel plate.
The process of making ribs in corrugated sheets is shown in two
ways:
Technical Parameters
① plate width: 300mm-1300mm
② corrugation height: 50mm-400mm
③ corrugation pitch: >=45mm
④ plate thickness: 0.5mm-1.75mm
⑤ Forming speed: provided by the bidder
⑥ Power: Offered by the bidder
⑦ control system: electrical, hydraulic and control panels
