AC input , Dimmable microwace motion sensor , with daylight
monitoring
Quick Details:
Zero-cross point operation, protect the sensor relay against the
in-rush current, secure the max. load and life time of the relay.
Dual-processor technology, real daylight monitoring function for
built-in application.
Features:
| Input voltage: | 120〜277V AC, 50/60Hz. |
| Rated load: | 400W@120VAC (capacitive) 800W @ 200〜277VAC (capacitive) |
| Detection range: | up to 12m in diameter |
| Mounting height: | 3~6m |
| Operation temperature: | -20℃~ +70℃ |
| RoHS compliant | |
Settings:
Detection range: 100%, 75%, 50%, 25% for your options
Hold-time
Hold-time means the time period to keep the lamp on 100% after
motion detected.
T3s, 30s,90s,5min,10min,30min for your options
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable
the sensor function.
"Disable": The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level
before it is completely switched off in the long absence of people.
“+∞”: means bi-level dimming control, the fixture never switch off.
10s,5min,10min,30min,1H, +∞ for your options
Stand-by dimming level
This is the dimmed low light level you would like to have after the
hold-time in the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc 50%--Vdim=5.0Vdc
0%, 10%, 30%, 50% for your options
Detection pattern--
Daylight monitoring function--
Utilizing the Dual-processor technology, this sensor can tell the
difference of natural light and artificial light(lamp) from behind
the diffuser, switch on automatically(even without movements) when
the ambient light is below target value, and then switch off
automatically whenever the artificial light is not required(ambient
light is bright enough).
Note: Lux-Off sampling time---30s; Lux-On sampling time---10s.
Lux-On function takes effect only when standby dimming period set
at+∞.
