1'' CA25T Goyen Type T Series Integral Pilot Dust Collector Pulse
Jet Valves AC220V AC110V DC24V
Goyen type CA25T dust collector pulse jet valve is the compressed
air "switch" of the pulse bag type dust collector cleaning system.
Under the control of the output signal of the pulse blowing
controller, the filter bag is sprayed and cleaned row by row, so
that the resistance of the dust collector is kept within the set
range to ensure the processing capacity and dust collection
efficiency of the dust collector. Pulse valve life: Five years of
use under standard installation, proper use, and reasonable
maintenance. We mainly sell a variety of products such as Goyen
type CA/RCA series dust collector valves, ASCO type SCG series
pulse jet valve, SBFEC type DMF series diaphragm valve, and so on.
And we also supply their repair kits (solenoid coil, armature
assembly, o-ring, spring, diaphragm).
YouTube video of CA25T Replacement Dust Collector Pulse Valve:
Overall dimension of CA25T Integral Pilot Impulse Diaphragm Valve:
Spare part details of 1 Inch CA25T Dust Collector Diaphragm Valve:
Technical parameters of Goyen Type Replacement Dust Collector
Valves:
| Model numbers | CA15T | CA20T | CA25T | CA35T | CA40T | CA50T | CA62T | CA76T |
| Nonimal diameter | φ15 | φ20 | φ25 | φ35 | φ40 | φ50 | φ62 | φ76 |
| Port sizes | G1/2'' | G3/4'' | G1'' | G1 1/4'' | G1 1/2'' | G2'' | G2 1/2'' | G3'' |
| Weighgts (kg) | 0.6 | 0.6 | 0.72 | 1.1 | 1.5 | 2.9 | 3.4 | 4.8 |
| Working pressure | 0.3-0.8 Mpa |
| Environment temperature | -5℃-55℃ (NBR) |
| Relative humidity | ≤85% |
| Operating medium | Compressed air |
| Protection class | IP 65 |
| Service life | Over 1000000 times |
| Voltages | DC24V, AC110V, AC220V |
Brief introduction to several types of dust collectors:
According to the structure and arrangement of the dust removal
equipment, the dust removal system can be divided into three types:
independent dust removal unit, distributed mechanical dust removal
system and centralized mechanical dust removal system.
1. Centralized mechanical dust removal system
When a plant or workshop, all or a lot of exhaust points, connected
into a dust removal system, this system is called a centralized
mechanical dust removal system. The air duct can be divided into
two types: a branch type and a collecting tube type.
2. Independent dust collector
A dust removal device in which a blower, an electric motor, a dust
collector and a part of connecting pipes are all installed in a
single unit is called a separate dust removing unit. The dust
removing device has the characteristics of compact structure, small
size and high dust removal efficiency. It can be used for dust
removal of packaging machines, reciprocating feeders, crushers and
screening devices. The short pipes should be arranged on the side
of the dust-dissipating equipment, and the purified gas can be
directly discharged indoors.
3. Decentralized mechanical dust removal system In a workshop, a
dust removal system that only connects 1-2 extraction points is
called a decentralized mechanical dust removal system. In the
powder processing workshop, when the local exhaust hoods are far
apart or the dust-distributing equipments are not working at the
same time and the materials processed by the dust-discharging
equipment are different, it is reasonable to set up a decentralized
dust-removing system. Simple, able to accommodate production
conditions, dust removal effect is more reliable, and can be
directly operated by production operators. However, dust collection
and recycling by dust removal equipment is not as convenient and
easy as centralized dust removal system.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
